Jonsbo TK-2 2.0 Midi Tower, tempered glass - black

– Modern midi tower in white from Jonsbo
– U-shaped tempered glass on the side and front
– Space for mini-ITX, micro-ATX and ATX motherboards
– Cooling via chimney effect, up to 9x 120 mm fans possible
– Two 360 mm radiators on the top and bottom possible
– Space for graphics cards up to 405 mm
– For two 3.5 inch or 1x 2.5 and 1x 3.5 inch data storage devices

The Jonsbo TK-2 2.0 midi tower: elegant and modern
On the outside, the TK-2 2.0 ATX case from Jonsbo impresses with its elegant and modern cube design with rounded edges and flawless workmanship. The U-shaped tempered glass panel extends from the front across the left side and even covers a small part of the back. The rounded shape gives the TK-2 2.0 Micro-ATX case its unique design and skilfully showcases your powerful hardware.

Plenty of space for hardware
The TK-2 2.0 Micro-ATX case uses a two-chamber design. In the main chamber you can present your mainboard and GPU with a length of up to 405 mm. The right chamber houses the power supply and either two 3.5-inch drives or one 2.5-inch and one 3.5-inch drive. There is also plenty of space for cable management.

With its dimensions of 300 x 435 x 408 millimeters, the TK-2 2.0 Micro-ATX case from Jonsbo is still quite compact, but full-fledged gaming hardware can be accommodated inside. In addition to a mini-ITX, micro-ATX or ATX mainboard, there is also space for graphics cards up to 405 millimeters in length.

Mainboard tray for motherboards with rear connections
The mainboard tray is a special feature of this case. It has recesses for motherboards with rear connections, such as the BTF series from ASUS, from the Stealth project from GIGABYTE or from the Project Zero from MSI. The cable routing from the mainboard is therefore direct and invisible into the second chamber to the power supply and the drives.

Chimney effect for optimal cooling
For cooling, three 120 mm fans can be mounted on the floor. Three additional 120 mm fans can be accommodated in the lid of the elegant case and reinforce the natural chimney effect, which benefits the cooling of all components. Alternatively, a 360 mm or 280 mm radiator can be attached to the lid and a 360 mm radiator can be attached to the floor. There is room for three more 120mm fans on the side. Holes on the lid, on the right side panel and on the back provide air supply. An air filter is installed on the underside, which can be removed and attached if necessary. Ventilation holes there also ensure cooling of the second chamber.

Discreet I/O panel
The right chamber ends at the front with an aluminum panel in which the power switch, the 3.5 mm audio jack and the USB-C 3.1 and USB-A 3.0 ports are discreetly embedded.