Jonsbo TK-1 2.0 Micro-ATX Case, Tempered Glass - black

– Modern Micro-ATX case in white from Jonsbo
– U-shaped tempered glass on the side and front
– Space for Mini-ITX and Micro-ATX motherboards
– Cooling via chimney effect, up to 4x 120 mm fans possible
– A 240 mm radiator on the lid possible
– Space for graphics cards up to 280 mm
– For two 3.5 inch or 1x 2.5 and 1x 3.5 inch data storage devices

The Jonsbo TK-1 2.0 Micro-ATX case: Elegant and modern
On the outside, the TK-1 2.0 Micro-ATX case from Jonsbo impresses with its elegant and modern cube design with rounded edges and flawless workmanship. The U-shaped tempered glass panel extends from the front across the left side and even covers a small part of the back. The rounded shape gives the TK-1 2.0 Micro-ATX case its unique design and skilfully showcases your powerful hardware.

Plenty of space for hardware
The TK-1 2.0 Micro-ATX case uses a two-chamber design. In the main chamber you can present your mainboard and GPU with a length of up to 280 mm. The right chamber houses the power supply and either two 3.5-inch or one 2.5-inch and one 3.5-inch drive. There is also plenty of space for cable management.

With its dimensions of 299 x 345 x 310 millimeters, the TK-1 2.0 Micro-ATX case from Jonsbo is still quite compact, but full-fledged gaming hardware can be accommodated inside. In addition to a Mini-ITX and Micro-ATX mainboard, there is also space for graphics cards with a length of up to 280 millimeters.

Mainboard tray for motherboards with rear connections
The mainboard tray is a special feature of this case. It has recesses for motherboards with rear connections, such as the BTF series from ASUS, from the Stealth project from GIGABYTE or from the Project Zero from MSI. The cable routing from the motherboard is therefore direct and invisibly into the second chamber to the power supply and the drives.

Chimney effect for optimal cooling
Two 120 mm fans can be mounted on the floor for cooling. Two additional 120 mm fans can be accommodated in the lid of the elegant case and reinforce the natural chimney effect, which benefits the cooling of all components. Alternatively, a 240 mm radiator can be attached to the lid. Holes on the lid, on the right side panel and on the back ensure air supply. An air filter is installed on the underside, which can be removed and attached if necessary. Ventilation holes there also ensure cooling of the second chamber.

Discreet I/O panel
The right chamber ends at the front with an aluminum panel in which the power switch, the 3.5 mm audio jack and the USB-C 3.1 and USB-A 3.0 ports are discreetly embedded.