EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90 degrees - Acrylic (6pcs) is a 6-pack of 10/14mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90 degrees - Acrylic (6pcs) is a 6-pack of 10/14mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90 degrees - Acrylic (6pcs) is a 6-pack of 10/14mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
Technical data:
– Material: Extruded acrylic
– Inner diameter: 10 mm
– Outer diameter: 14 mm
– Total length: 800 mm
– Bend Angle: 90 degrees
– Bend Radius: R25
– Length per axis: 550x250mm
£61.49£51.24 Inc VatEx Vat
