be quiet! Dark Power Pro 14 IO 1300W

The be quiet! Dark Power Pro 14 IO 1300W delivers up to 1,300 W of power to high-performance gaming PCs and workstations. Its 80 PLUS Titanium certification ensures high efficiency of up to 94.9%. Two 12V-2×6 connectors and PCIe 5.1 support make the power supply ready for high-performance graphics cards.

–  1,300 W of power for high-performance PC systems
– 80 PLUS Titanium for high energy efficiency
– Two 12V-2×6 connectors for modern graphics cards
– Fully modular design simplifies cable management
– IO Center enables control and monitoring
– 1,300 W for high-performance hardware

The power supply delivers the full 1,300 W on the 12V rail, making it suitable for powerful CPUs and graphics cards. Two native 12V-2×6 connectors and six 6+2-pin PCIe connectors allow for flexible GPU configurations. The ATX 3.1 standard also supports the high, short-term power spikes characteristic of modern hardware.

High efficiency and quiet cooling
80 PLUS Titanium and Cybenetics Titanium certifications confirm an efficiency of up to 94.9%. A 135mm Silent Wings fan and an aluminum heatsink dissipate heat effectively. The semi-passive cooling design can stop the fan during low-load periods, thereby reducing noise levels.

IO Center for control and customization
The be quiet! IO Center software allows you to monitor operating data and adjust cooling and operating modes. The fully modular cable management system lets you connect only the cables you actually need. This leaves more space inside the case for a tidy layout and unobstructed airflow.

MONITORING AND FULL CONTROL
With the be quiet! IO Center software
The Dark Power Pro 14 IO 1300W is the first be quiet! PSU with smart software control via the be quiet! IO Center. It lets you switch between Multi Rail and Single Rail modes and choose semi passive or active fan settings. The dashboard shows real-time data for efficiency, fan speed and power usage. A cost calculator estimates your energy expenses over time. With this blend of power and insight, it sets a new standard for intelligent PSU control.

SWITCH IT
Switch effortlessly between active and semi-passive cooling
The Dark Power Pro 14 IO 1300W gives full control over cooling and performance. Choose between a balanced active mode for constant, efficient airflow, or a smart semi-passive mode where the fan stops during light loads. When things heat up, the Silent Wings fan powers on seamlessly to deliver the cooling the system needs.

READY FOR OVERCLOCKING
Maximum strength
Dark Power Pro 14 IO 1300W is particularly suitable for overclocking. With the be quiet! IO Center software, it is possible to manually switch between multi-rail and single-rail mode. This gives full overclocking control, from the default six 12V-rail mode to the alternative massive single-rail operation.

THE HIGHEST EFFICIENCY POSSIBLE
Titanium efficiency
Dark Power Pro 14 IO 1300W is certified with 80 PLUS® Titanium and Cybenetics Titanium for a stunning energy efficiency rating of up to 94.9%. This provides lots of benefits for a high-end system, including less power consumption and an overall cooler and quieter operation.

PEAK TECHNOLOGY
Higher efficiency and lower ripple noise
Experience with Dark Power Pro 14 IO 1300W the most technologically advanced power supply be quiet! has ever built! Using an advanced digital full bridge LLC technology results in higher efficiency, better regulation and lower ripple noise for an incomparably stable operation.

HEAT SINK AND INTEGRATED SILENT WINGS
Simply fan-tastic
A large heat sink connects to the parts of the power supply that need the most cooling and dissipates a large portion of the heat. Even though a Titanium efficiency power supply does not generate as much heat, active cooling is required to prevent overheating issues under high load. Nothing less than the very best fan of be quiet! cools Dark Power Pro 14 IO 1300W. Being integrated directly into the heat sink, this high-end fan is immune to vibrations. A 6-pole fan motor and fluid-dynamic bearing ultimately make for exceptionally long lifetime and minimal power consumption.

105°C CAPACITORS FROM JAPAN
Only the best
Each component in Dark Power Pro 14 IO 1300W is carefully selected. That is why we have exclusively used high-quality Japanese capacitors for this PSU. They are rated to 105°C, ensure stability, reliability, and a long operating life.

NEXT GEN
ATX 3.1 compatibility
Dark Power Pro 14 IO 1300W is an ATX 3.1 PSU and comes with both native integration of two 12V-2×6 connectors for next-generation PCIe 5.1 graphics cards and PCIe 6+2-pin connectors for support of all current-gen GPUs. This makes the PSU extremely versatile and perfect for current and future high-end systems.