AXAGON ADSA-CC USB-C 10Gbps - NVMe M.2 SSD and SATA 2.5inch/3.5inch SSD/HDD CLONE MASTER 2

With the AXAGON ADSA-CC USB-C 10Gbps – NVMe M.2 SSD & SATA 2.5/3.5 SSD/HDD CLONE MASTER 2 you can use your 2.5 or 3.5 inch SSDs and HDDs and also NVMe – Easily use M.2 SSDs outside of your PC case.

The docking station is connected via fast USB 3.1 and supplied with power via a mains plug. It is possible to connect a 2.5/3.5 inch drive and an M.2 card at the same time. Since a 3.5-inch drive requires additional power, an adapter for the power supply is included.

In addition, the dock has a clone feature. With this feature, you can copy and back up the contents of one drive to the other without connecting a computer. This is particularly useful if, for example, you want to switch from an old SDD to an M.2 as the system hard drive.

Technical details
– Dimensions: 109 x 68 x 15 mm (W x H x D)
– Weight: 73g
– Color: Black
– Material: metal, plastic
– Connection:
– 1x USB-C 3.1 (on dock)
– 1x USB Type-A / Type-C connector (on the cable to the PC)
– Data transfer rate: USB 3.1 (USB 3.2 Gen 2, max. 10 Gbit/s)
– SATA slots:
– Interface: Serial ATA 3.0
– Connection: 2x 22-pin data SATA and power socket
– Compatibility: all SATA I / SATA II / SATA III hard drives
– Supported drive sizes: 2.5 and 3.5 inches
– M.2 slot (internal):
– Interface: M.2
– Connection: M-Key & B+M-Key, 2242, 2260, 2280
– Compatibility: NVMe PCIe 3.0 & SATA 6G
– Power supply: power adapter
– Scope of delivery:
– 1x AXAGON ADSA-CC USB-C 10Gbps – NVMe M.2 SSD & SATA 2.5/3.5 SSD/HDD CLONE MASTER 2
– 1x USB and power cable (30 cm)
– power adapter
– 4x thermal pads