The Wing Boost 3 ARGB combines many of the benefits of its famous predecessors with a circular, addressable RGB LED lighting in the outer frame.
The Wing Boost 3 ARGB combines many of the benefits of its famous predecessors with a circular, addressable RGB LED lighting in the outer frame.
The Wing Boost 3 ARGB combines many of the benefits of its famous predecessors with a circular, addressable RGB LED lighting in the outer frame.
The eponymous Wing Boosts, small increases on the impeller intake side, reduce air turbulence. The fan therefore works quieter at higher speeds than conventional fan designs would allow. The triple set offered here consists of three fans including RF receiver, splitter cables and remote control for controlling and synchronizing the three fans included in the set.
The features of the Alpenföhn Wing Boost 3 Overview of the ARGB High Speed Fan:
– Three 120-millimeter fans with digitally addressable RGB lighting
– Hydrodynamic bearing for high performance, quiet operation and long life
– Optimized rotor blades deliver the perfect balance between contact pressure and airflow
– High quality IC motor control for minimal noise
– Speed range from 700 to 2,200 rpm
– 4-pin PWM and 3-pin RGB connector
– Including RGB and PWM splitter, RF remote control and receiver as well as screws
– ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome
– Wing Boost 3 ARGB High Speed: Powerful 120mm fan
The Wing Boost 3 ARGB High Speed is a PWM-controlled, 120-millimeter fan that is equally well-suited for mounting on enclosures, processor coolers and radiators. The fan operates in a speed range between 700 and 2,200 revolutions per minute, achieving a delivery volume of 132.4 m³ / h and a static pressure of 3.24 mm H2O.
The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame ensure whisper-quiet operation, even at low revs. The noise is additionally achieved by the integrated IC motor control. Even under full load, the Wing Boost 3 ARGB High Speed produces an acceptable noise level of no more than 36.8 decibels.
Addressable RGB LED lighting in the frame
The Alpenföhn Wing Boost 3 ARGB High Speed is equipped with digitally addressable RGB LED lighting. The manufacturer has integrated two 16.8 million colored rings into the fan frame, which casts a light glow on the impeller and can be connected to the motherboard or corresponding controllers via a 3-pin RGB connector. Wing Boost 3 RGB High Speed is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.
In addition to the three fans of the Alpenföhn Wing Boost 3 RGB High Speed model, this set also includes the complete range of accessories for synchronizing the PWM signal and the RGB LED lighting of the three fans. The lighting can be controlled via the enclosed remote control.
Delivery:
– 3x Alpenföhn Wing Boost 3 RGB
– 12x screws for housing
– 12x screws for radiator
– 1x RF remote control
– 1x RF receiver
– 1x RGB splitter
– 1x PWM splitter
| General Specifications | |
|---|---|
| Dimensions | 120 x 120 x 25 mm (W x H x D) |
| Material | Plastic, Rubber |
| Colour | Black (fan & frame), Grey (decoupler) |
| Noise Level | Up to 36.8 dB(A) |
| Speed | 700 – 2,200 rpm |
| Airflow | Up to 132.4 m³/h |
| Static Pressure | 3.24 mmH₂O |
| Voltage | 12V |
| Connection & Lighting | |
| Fan Connector | 4-pin PWM |
| RGB Connector | 3-pin RGB (5VDG) |
| Lighting | RGB (16.8 million colours) |
£54.13£45.11 Inc VatEx Vat
