The black midi tower for budget systems has a stylish design, a striking front with a generous air intake, a pre-installed 120 mm fan and generous air cooling options.
The black midi tower for budget systems has a stylish design, a striking front with a generous air intake, a pre-installed 120 mm fan and generous air cooling options.
The black midi tower for budget systems has a stylish design, a striking front with a generous air intake, a pre-installed 120 mm fan and generous air cooling options.
With space for Mini-ITX, Micro-ATX and ATX mainboards and graphics cards up to 325 mm, full-fledged gaming PCs can also be implemented.
The features of the Aerocool Zauron at a glance:
– Midi Tower for ATX, Micro-ATX and Mini-ITX
– Tempered Glass side panel
– – Striking front with mesh surface
– Including 1x 120 mm fan with fixed RGB LED lighting
– Graphics cards up to 325 mm, CPU coolers up to 166 mm
– I/O panel 2x USB 3.0 type A & 1x audio in and out each
Aerocool Zauron: Stylish midi tower with RGB lighting
– The Aerocool Zauron comes with showcase elements in the format of a midi tower. The black plastic front has a striking design and is equipped with a fine mesh surface for good airflow. The I/O panel with two USB 3.0 ports is located on the lid. A large side panel made of tempered glass allows a look inside the steel chassis and the hardware installed there.
Cooling with air and water
– A total of up to five case fans can be installed in the Aerocool Zauron: There is space for three 120 or two 140 mm fans in the front, two 120 mm fans can be installed in the cover and one 120 mm fan with fixed RGB LED Lighting is already factory installed in the back of the case. Tower coolers must not exceed a height of 166 mm. There is also the option of installing water cooling in the midi tower. The front can accommodate a 240mm radiator and the fan in the rear wall can give way to a 120mm radiator.
– A total of five data storage devices can be installed in the Aerocool Zauron. The drive cage under the power supply cover on the bottom of the case offers space for two 3.5-inch drives, one of which can be replaced with a 2.5-inch drive. An additional 2.5-inch data carrier can be attached to the back of the mainboard tray. Two more 2.5-inch drives can be mounted vertically next to the mainboard. A length of 325 mm is planned for the installation of high-performance graphics cards. There is 24.6 mm of space for cable management.
Technical details:
– Dimensions: 208 x 430 x 330 mm (W x H x D)
– Material: steel, plastic, tempered glass
– Color: Black
– Form Factor: ATX, Micro-ATX, Mini-ITX
– Fan total possible:
– Front: 3x 120mm / 2x 140mm
– Rear: 1x 120mm
– Top: 2x 120mm
– Of which pre-installed:
– 1x 120mm fan (rear)
– Radiator Support:
– Front: 1x 120/240mm
– Rear: 1x 120mm
– drive bays:
– 1x 3.5/2.5 inch (internal)
– 1x 3.5 inch (internal)
– 3x 2.5 inch (internal)
– Power supply: 1x standard ATX up to 173 mm (optional)
– Expansion slots: 7
– I/O panel:
– 2x USB 3.0 Type A
– 1x per audio in/out
– Maximum graphics card length: 325 mm (without front fan)
– Maximum CPU cooler height: 166mm
