Alphacool offers a wide range of thermal pads to enable effective heat dissipation from electrical components.
- SKU: 1023422
- MPN: 13488
- EAN: 4250197134880
The Thermal Grizzly Minus Pad Extreme is an excellent choice for applications where thermal paste is not an option due to its unwieldy application.
Thermal Grizzly Minus Pad Extreme - 120 x 20 x 1.5mm
The Thermal Grizzly Minus Pad Extreme is an excellent choice for applications where thermal paste is not an option due to its unwieldy application.
The Thermal Grizzly Minus Pad Extreme is an excellent choice for applications where thermal paste is not an option due to its unwieldy application.
Earn 26 Points
We price match UK retailers. Try It Now!
- SKU: ZUWA-230
- MPN: TG-MPE-120-20-15-R
- EAN: 4260711990472
- Warranty: 12 Months
Details
This is particularly useful when distances between the heat source and the heat sink have to be bridged – for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay.
This enables an ideal surface design with maximum possible compaction. Thermal conductivity has been improved by approximately 260% over the Minus Pad 8, allowing for the best performance for difficult cooling tasks such as voltage regulators and memory ICs.
The Minus Pad Extreme is available in different sizes and thicknesses – here 120 x 20 x 1.5 mm. The pads work extremely well with very little contact pressure and the thermal conductivity is only slightly affected by the thickness. The choice of thickness should therefore depend entirely on the gap to be bridged. The Minus Pad Extreme is electrically isolating. Due to consistency, single use only is recommended.
Danger! This product comes with a protective film that must be removed prior to installation. We assume no liability for damage caused by faulty or incorrect assembly and improper use!
| Product Specifications | |
|---|---|
| Dimensions | 120 x 20 x 1.5 mm |
| Quantity | 1 Piece |
| Density | 3.38 g/cm³ |
| Hardness | 65 Shore 00 |
| Dielectric Strength | 8 kV/mm (ASTM D149) |
| Operating Temperature | -100°C to +250°C |
| Flammability | V-0 |
| Colour | Rusty Brown |
Customer Product Reviews
Overall rating
Earn
25 point when you review this product
Write a review
Select rating and write review
Related Products
£12.86£10.72 Inc VatEx Vat
Available
Alphacools ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad:
- SKU: 1011301
- MPN: 12458
- EAN: 4250197124584
£40.69£33.91 Inc VatEx Vat
Available
Alphacools new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of...
- SKU: 1010967
- MPN: 12196
- EAN: 4250197121965
£5.42£4.52 Inc VatEx Vat
Available
Alphacool offers a wide range of thermal pads to enable effective heat dissipation from electrical components.
- SKU: 1023423
- MPN: 13489
- EAN: 4250197134897
£28.73£23.94 Inc VatEx Vat
Available
Alphacools performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat.
- SKU: 1023200
- MPN: 13416
- EAN: 4250197134163
£18.86£15.72 Inc VatEx Vat
Available
Alphacools ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all...
- SKU: 1011296
- MPN: 12452
- EAN: 4250197124522
£32.64£27.20 Inc VatEx Vat
Available
£31.07£25.89 Inc VatEx Vat
Only 3 Available