SilverStone SST-GM400-1UB Gemini Series redundant server power supply - 2x 400 watts

– Redundant power supply for more security
– 400 watts + 400 watts operating power
– 1U form factor
– Suitable for 24/7 operation
– Hot-swappable design
– User-friendly handles for replacement

SilverStone SST-GM400-1UB Gemini Series: Two is better than one
This redundant power supply from SilverStone was specially designed for use in servers and important computer systems. The 1U form factor housing has two chambers, each of which contains independently functioning power supplies. This means that your end device is reliably protected. In the event that one power supply fails, the second can step in without restrictions and keep your system running without interruption.

The power supply is designed for 24/7 operation – 24 hours a day, 7 days a week. With an output of 400 watts per chamber, you get enough buffer to protect your systems.

User-friendly, robust and durable
The housing is made of robust aluminum, which not only increases stability but also helps to dissipate heat better. The average operating temperature is around 45 degreesC. The interior of this power supply is also impressive: Japanese electrolytic capacitors are used here, which increase protection against overvoltage and short circuits.

In addition, the two power supplies are hot-swappable (replacement during operation) – as long as one power supply remains connected and your hardware is supplied with power. User-friendly handles are attached to the back for changing so that the exchange can be carried out in just a few seconds.

Technical details:
Dimensions:
– Case with bracket without handle: 123 x 41.5 x 270 mm (W x H x D)
– Case without bracket: 106 x 41.5 x 260 mm (W x H x D)
– Module only without handle: 50 x 40 x 220 mm (W x H x D)
– Weight: 2.15 kg
– Certification: Cybenetics Bronze, 82% to 85% efficiency
– Connections:
– 1x 24 / 20-pin mainboard connector
– 1x 8-pin EPS / ATX 12V connector
– 1x 4-pin EPS / ATX 12V connector
– 3x SATA connector
– 5x 4-pin peripheral connector
– 1x 4-pin floppy connector
– 1x 2-pin +5V TTL connector
– 3x LED connector
– Fan: 1x 40 mm (rear)
– Volume: 52 dBA
– Operating temperature: 0 to 45 degreesC
– Active PFC (> 0.9)
– Form factor: 1+1 redundant 1U form factor
– Power: 400 W
– +3.3V: 20 A
– +5V: 20 A
– +12V: 32 A
– -12V: 0.5 A
– +5Vsb: 3.0 A
– Protection circuits:
– OVP (overvoltage and undervoltage protection)
– UVP (undervoltage protection)
– SCP (short circuit protection)
– OCP (overcurrent protection)