PHANTEKS Enthoo Pro 2 Big Tower - black

The PHANTEKS Enthoo Pro 2 is compatible with large mainboards in the form factor SSI-EEB and E-ATX. With various mounting brackets, the tower offers many options for adapting the interior to your own requirements. Dual systems, dual PSU systems, numerous options for extensive water cooling circuits and vertical graphics card installation are supported ex works. In short: The Enthoo Pro 2 leaves nothing to be desired.

The features of the PHANTEKS Enthoo Pro 2 at a glance:
– Big tower by PHANTEKS with closed side part
– Included mounting brackets for dual systems and dual PSU systems
– For mainboards up to SSI-EEB and E-ATX
– Various options for air and water cooling
– A total of 8x 140 or 15x 120 fans possible
– Radiators: max. 2x 480 mm, 2x 360 mm and 1x 140 mm
– CPU cooler up to 195 mm / graphics cards up to 503 mm (vertical installation possible)
– Up to 12x 3.5 or 11x 2.5 inch slots for data carriers
– I / O panel with 1x USB 3.1 Type-C and 4x USB 3.0 Type-A
– Enthoo Pro 2: Big tower with numerous customization options

At first glance, the casing looks similar to its predecessor, but PHANTEKS has completely redeveloped the Enthoo Pro 2. The Big Tower offers a sophisticated interior with black powder coating and numerous finesse. In the bottom of the case there is a power supply cover on which a second system in mini ITX format or a second power supply can be installed. Both brackets for this are included.

The PHANTEKS Enthoo Pro 2 has space for motherboards in SSI-EEB, E-ATX, ATX, Micro-ATX and Mini-ITX format. In addition to the eight PCI slot covers, the housing offers two vertical PCI slot covers for mounting graphics cards. The cards can be up to 503 millimeters long. Numerous rubberized cable ducts, the supplied cable ties with Velcro fasteners and additional covers offer excellent options for a clean, invisible cable routing.

Note: A corresponding riser cable for vertical mounting of graphics cards is not included in the housing and can be purchased separately in our online shop.

Air and water cooling options
The Enthoo Pro 2 is predestined for the installation of a custom water cooling: A radiator in 480 or 420 format can be installed in the front, however the HDD cages can get in the way. The fans are attached to the outside of the chassis, which means that less space is lost in the interior. There is space for a 360 millimeter model in the lid and in the bottom.

A 140 or 120 radiator is provided on the rear. A radiator up to 480 millimeters in size can be installed on the mainboard tray. The right side wall has numerous openings at this point to optimize the air supply. An opening for a drain port is prepared in the front.

PHANTEKS has also thought of classic air cooling and enables the installation of up to 15 120 mm or eight 140 mm fans. There is room for four 120 or three 140 models in the front, while a 140 or 120 case fan can be installed in the rear. Three 120 mm or three 140 mm fans can be installed in the lid of the Big Tower. There is space for four 120 mm fans on the mainboard tray and three 120 or 140 fans can be mounted on the case bottom. CPU coolers can be up to 195 millimeters high.

Numerous drives fit into a big tower like the Enthoo Pro 2: eleven 2.5-inch and four 3.5-inch drives can be installed ex works. With optional brackets, the Enthoo Pro 2 can even accommodate up to twelve 3.5-inch drives.

The I / O panel is hidden behind a flap in the front of the housing. In addition to the power button, four USB 3.0 ports, a USB 3.1 port of type C and a microphone-headphone combo socket are hidden behind the flap.