Montech X3 Mesh Midi-Tower, RGB, Tempered Glass - white

– Midi tower with mesh front
– Supports motherboards up to ATX and 305 mm long GPUs
– Three 140 mm and three 120 mm fans pre-installed, eight possible in total
– Space for up to four drives
– Tempered glass side panel on hinges

The Montech X3 Midi Tower
The Montech X3 Mesh Midi Tower: The perfect entry point for your gaming setup
The Montech X3 Mesh Midi Tower is the ideal basis for your self-built gaming PC. The PC case is equipped with a pronounced air cooling system from the factory so that you can concentrate on installing your preferred gaming hardware. At the same time, it can be expanded so that you can turn it into your very own gaming setup. It also looks damn good, thanks in part to the tempered glass side panel on hinges.

The Montech X3 Midi-Tower
Well cooled from the factory
The total of six pre-installed fans ensure plenty of airflow in the PC case, which is also supported by the mesh panel on the front. There are three 140mm fans installed there. There are two more 120mm fans under the lid and a third on the back. Two more 120mm fans can be installed on the power supply cover. They can help cool the graphics card there. The CPU can be fitted with a cooler up to 160mm high.

The Montech X3 Midi-Tower
The Montech X3 Mesh offers plenty of space for sophisticated gaming hardware. Mainboards up to ATX form factor are supported. Graphics cards attached to them can be up to 305mm long. Power supplies with a maximum length of 160mm fit under the power supply cover. There is also a drive cage in which you can accommodate two HDDs or SSDs. Two SSDs can be attached to the back of the mainboard tray.

On the IO panel on the side of the lid, there is a USB-A 3.0 port and two USB 2.0 ports as well as a 3.5 mm jack for microphone and headphones, as well as a switch to turn the preconfigured lighting on and off.

Technical details:
– Dimensions: 210 x 480 x 370 mm (W x H x D)
– Material: steel, tempered glass
– Weight: 5.42 kg
– Color: white
– Form factor: ATX, Micro-ATX, Mini-ITX
– Total number of fans possible:
– Front: 3x 120 / 140 mm
– Cover: 2x 120 mm
– Rear: 1x 120 mm
– Power supply cover: 2x 120 mm
– Of which pre-installed:
– Front: 3x 140 mm
– Cover: 2x 120 mm
– Rear: 1x 120 mm
– Radiator mountings: n/a
– Filter: bottom (removable), cover (magnetic)
– Drive bays:
– 2x 3.5 inch / 2.5 inch (tool-free installation)
– 2x 2.5 inch (back of mainboard tray)
– Expansion slots: 7
– I/O panel:
– 1x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
– 2x USB 2.0 (Type A, max. 480 Mbit/s)
– 2x 3.5 mm jack (3-pin, for microphone/headphones)
– 1x power button
– 1x reset button
– 1x LED control (on/off)
– Maximum graphics card length: 305 mm
– Maximum CPU cooler height: 160 mm
– Power supply: ATX, max. 160 mm length