Kolink Observatory Lite Mesh RGB Midi-Tower - black

The total of four pre-installed ARGB-LED 120mm fans, which are included as standard, can be controlled via an integrated controller including remote control, which offers a variety of lighting options and lighting modes and even enables speed control. In addition, the Kolink Observatory Lite Mesh RGB offers a large mesh front for optimized airflow. In order to optimally showcase the hardware you want to install, there is also the tempered glass side panel. The extremely stable Observatory Lite offers a lot of features for an unbeatable price.

The features of the Kolink Observatory Lite Mesh RGB at a glance:
– Large mesh front with three pre-installed 120 mm ARGB fans
– A pre-installed 120 fan on the back, also with digitally addressable RGB LEDs
– Including fan hub including remote control for RGB lighting and fan speed
– Alternative control of fan speed and lighting via mainboard
– Tempered glass side panel for an unobstructed view inside
– Space for motherboards with ATX, Micro-ATX or Mini-ITX form factor
– Space for a 280 radiator on the front
– I / O panel with 1x USB 3.0, 2x USB 2.0, HD audio and reset / RGB LED switch
– Power supply cover for a tidy interior
– Graphics cards up to 335 mm, CPU coolers up to 160 mm, power supplies up to 180 mm

Kolink Observatory Lite RGB: Mesh front for an optimized airflow
The four pre-installed 120 fans with digitally addressable RGB LEDs can be controlled via the supplied RGB hub and the associated remote control. Alternatively, the fans can be connected and controlled via a compatible motherboard, since the fans have a 3-pin standard connection (5VDG). Another option is to control the lighting using the reset switch on the I / O panel. The tempered glass side panel gives users a panoramic view of the lighting that illuminates the interior of the Kolink Observatory Lite Mesh RGB.

In addition to the pre-installed fans, users are also free to install two additional 120 mm fans on the cover. There is a magnetic dust filter installed on the honeycomb grid. The entire front consists of a fine mesh, which not only ensures optimal airflow, but also offers a view of the chic, illuminated fans. The side air intakes in the power supply cover also contribute to the good airflow of the case. At the front, the three 120 fans can also be replaced by two 140 fans or by a 240 or 280 radiator.

Kolink Observatory Lite Mesh RGB: The perfect case for high-end hardware
The interior is completely black and has a power supply cover that reinforces the elegant and tidy look. Behind the cover, two 3.5-inch hard drives can be accommodated in the hard drive cage, which also has an anti-vibration mount. Alternatively, 2.5-inch SSDs can be installed there or next to the main board. The mainboard tray and the power supply cover offer numerous openings for optimal cable routing. Between the mainboard tray and the right side panel there is plenty of space for cable management with up to 30 mm. There is a removable dust filter on the bottom of the case, which protects the optional power supply with ATX form factor. A power supply can be up to 18 cm long.

Graphics cards can be up to 335 millimeters long. If a radiator is installed at the front, the permitted length is reduced to 310 millimeters. CPU coolers can have a maximum height of up to 160 millimeters. The I / O panel in the front part of the cover has two USB 2.0 ports and a USB 3.0 Type-A port. There is also the reset switch, which can also be used for the control of the RGB LED lighting.