Montech KING 95 PRO Midi-Tower, Tempered Glass, ARGB - red

Midi tower with front and side panel made of tempered glass
– Cover and right side panel with ventilation slots for excellent airflow
– Two-chamber design for up to two PSUs and 35 mm for cable management
– Supports motherboards up to ATX and 420 mm long GPUs
– Six 140 mm ARGB PWM fans pre-installed, a total of nine possible
– Up to three radiators possible, space for up to eight drives
– A PWM / ARGB hub included

The Montech KING 95 PRO Midi Tower
The Montech KING 95 PRO Midi Tower: The optimal entry point for your gaming setup
The Montech KING 95 PRO Midi Tower is the ideal basis for your self-built gaming PC with high-end hardware. The PC case is equipped with a sophisticated air cooling system ex works, so that you can concentrate on installing your preferred gaming hardware. At the same time, it is expandable so that you can turn it into your very own gaming setup. It also looks damn good, especially thanks to the tempered glass front and side panels, which fit together seamlessly.

The Montech KING 95 PRO Midi Tower
Well cooled from the factory
The total of six pre-installed fans ensure plenty of airflow in the PC case, which is also supported by the generous air inlets and dust filters integrated into the left side panel and the lid. Two 140mm ARGB PWM fans with reversed blades are installed on the side, which can be replaced by two 120mm fans. There is space under the lid for three 120mm or two 140mm fans. Another 120mm ARGB PWM fan is pre-installed on the back. Three more 120mm ARGB PWM fans with reversed blades are installed on the bottom. They can be replaced by two 140 mm fans. They can help cool the graphics card there. The CPU can be fitted with a cooler up to 175 mm high.

The Montech KING 95 PRO Midi Tower
Space for two power supplies and plenty of drives
The Montech KING 95 PRO offers plenty of space for sophisticated gaming hardware. Mainboards up to the ATX form factor are supported. Graphics cards attached to them can be up to 420 mm long. Up to two power supplies can be housed in the second chamber behind the mainboard tray. 35 mm of space remains for cable management. There is also a drive cage for either two HDDs or three SSDs. Two SSDs can be attached to the back of the mainboard tray. You can also accommodate three HDDs or SSDs on the floor instead of the fans.

On the IO panel on the side in front of the second chamber, there is a USB-C port and two USB 3.0 ports as well as a 3.5 mm jack for microphone and headphones, as well as a switch for controlling the lighting. The cover of the second chamber is surrounded by an ARGB strip. This PRO version of the Montech KING 95 comes with a hub for controlling the lighting and fan speed.

Technical details:
– Dimensions: 300 x 422 x 470 mm (W x H x D)
– Material: steel, tempered glass
– Weight: approx. 10 kg
– Color: red
– Form factor: ATX, Micro-ATX, Mini-ITX
– Total number of fans possible:
– Side: 2x 120 / 140 mm
– Cover: 3x 120 / 2x 140 mm
– Rear: 1x 120 mm
– Bottom: 3x 120 / 2x 140 mm
– Of which pre-installed:
– Side: 2x 140 mm (RX140 PWM ARGB)
– Bottom: 3x 120 mm (RX120 PWM ARGB)
– Rear: 1x 120 mm (AX120 PWM ARGB)
– Radiator mountings:
– Side: max. 240 / 280 mm
– Cover: max. 360 / 280 mm
– Rear: max. 120 mm
– Filter: bottom (removable), lid, left side panel
– Drive bays:
– 2x 3.5 inch / 3x 2.5 inch (HDD cage)
– 2x 2.5 inch (back of mainboard tray)
– 3x 3.5 / 2.5 inch (on the bottom)
– Expansion slots: 7
– I/O panel:
– 1x USB-C
– 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
– 1x 3.5 mm jack (4-pin, for microphone/headphones)
– 1x power/reset button
– 1x LED control (on/off)
– Maximum graphics card length: 420 mm
– Maximum CPU cooler height: 175 mm
– Power supply: 2x ATX, max. 190 mm length