The HEATKILLER Rev3.0 CPU sets new standards in performance, quality and ease of installation. The development of new high-end CPU cooler has been consistently on the latest CPU generations. A key incident, coupled with a nozzle plate, and a very fine Kühlgeometrie, give the cooler is an excellent cooling performance. The base plate can geometrically Heatspreader to adapt and thus provides for an optimal contact to the CPU.Trotz very expensive Kühlgeometrie is the extremely low flow resistance. For the use of quad-processors, the cooler a pluggable distribution plate, the individual CPU cores will be parallel angeströmt.
The HEATKILLER Rev3.0 CPU sets new standards in performance, quality and ease of installation. The development of new high-end CPU cooler has been consistently on the latest CPU generations. A key incident, coupled with a nozzle plate, and a very fine Kühlgeometrie, give the cooler is an excellent cooling performance. The base plate can geometrically Heatspreader to adapt and thus provides for a...
The HEATKILLER Rev3.0 CPU sets new standards in performance, quality and ease of installation. The development of new high-end CPU cooler has been consistently on the latest CPU generations. A key incident, coupled with a nozzle plate, and a very fine Kühlgeometrie, give the cooler is an excellent cooling performance. The base plate can geometrically Heatspreader to adapt and thus provides for a...
No products found
A modular design allows the easy opening of the HEATKILLER , a switch to a different mounting system is possible at any time and with a few done. Optional brackets and spare parts guarantee, even after several years, a smooth operation. The Kühlgeometrie, and the uppers are made of high-purity copper, the mount and made of polished stainless steel applications. To launch the copper to prevent the upper section with a special clearcoat sealed.
Details:
Material: Electrolytic Copper, Stainless Steel
Dimensions (block): (LxWxH) 59 x 59 x 17.5 mm
Weight: about 400g
Pressure Test: 5 bar
Seal: EPDM 75 (max. 150 degrees C)
Connection: G ¼ inch (DIN ISO 228-1)
Included:
All Nuts, Bolts, Springs & Washers
Instructions
Compatibility:
Socket 1156 – i5 (Intel Socket LGA) via the 4-holes through the motherboard.
