Antec C5 PC case, Midi-Tower, ATX, RGB, Tempered Glass - black

– Black case with 270 degrees tempered glass side panel
– Efficient cooling options with up to ten fans and radiators up to 360 mm
– Supports motherboards up to ATX
– Space for graphics cards up to 410 mm and CPUs with a height of up to 160 mm
– Up to three drives possible
– Supports motherboards with back connect
– Two-chamber design ensures independent cooling
– Seven ARGB fans included

The Antec C5: Midi tower with comprehensive cooling options
The Antec C5 offers you more than just enough space to assemble and install your hardware as you wish. Your gaming hardware is effectively cooled by the many cooling options. The two-chamber design also leads to an even more efficient airflow because the CPU and GPU as well as the power supply are cooled independently of one another. In addition, the tempered glass on the side and front allows a generous view of the inner workings of your case, so that the stylish RGB lighting comes into its own.

Fans and radiators
Powerful hardware requires equally powerful cooling that prevents overheating. Accordingly, up to ten fans can be installed in the Antec C5. Either three 120 mm fans or two 140 mm fans are possible on the lid and on the side. In addition, three more in 120 mm format can be mounted on the bottom and one on the back.

But whats special: In addition to the tower, you get a total of seven 120 mm PWM fans. Three of these are attached to the bottom and three to the side. The orientation of these ARGB fans is reversed. The seventh fan with normal orientation is on the back.

If you prefer to install a water cooling system, there are enough options here too. Radiators up to 360 mm in size can be installed in several places: on the lid and on the base. There is also space for a 280 mm radiator on the side and a 120 mm radiator on the back.

Thanks to the many options for cooling your hardware, your gaming PC will always work at peak performance. Dust filters on the base and lid ensure that as little dust as possible accumulates inside, which significantly extends the lifespan of your components.

Hardware options
The midi tower supports the installation of graphics cards up to 410 mm in size. This means that the current NVIDIA GPUs of the 40 generation are also possible. Mainboards up to ATX format are possible. Mainboards with the new back-connect design are also supported, so you dont have any annoying cable clutter.

The CPU cooler should not exceed a height of 160 mm. When it comes to the power supply, however, there are hardly any limits, as it can be up to 220 mm long and is attached to the side of the tower. To have enough storage for your programs and games, up to three drives can be installed on the side or bottom of the Antec C5.

Technical details
– Dimensions: 285 x 400 x 469 mm (W x H x D)
– Color: Black
– Material: Steel, tempered glass, plastic
– Weight: 9.2 kg
– Form factor: ATX, Micro-ATX, Mini-ITX
– Total fans possible:
– Cover: 3x 120 / 2x 140 mm
– Side: 3x 120 / 2x 140 mm
– Bottom: 3x 120 mm
– Rear: 1x 120 mm
– Fans pre-installed: 7
– Radiator mountings:
– Cover: 1x 360 / 280 / 240 / 140 / 120 mm
– Side: 1x 280 / 240 / 140 / 120 mm
– Bottom; 1x 360 / 240 / 120 mm
– Rear: 1x 120 mm
– Dust filter: cover, bottom
– Drive bays:
– 1x 3.5 / 2x 2.5 inch (removable hard drive cage on the side)
– 1x 3.5 / 2.5 inch (bottom, 3.5 inch only without front fan / 2.5 inch only without bottom fan on the side)
– Power supply: 1x ATX (optional, max. 240 mm)
– Expansion slots: 7
– I/O panel:
– 1x power button
– 1x LED control button
– 2x USB 3.0 (Type-A, USB 3.2 Gen 1, max. 5 Gbit/s)
– 1x USB 3.2 (Type C, USB 3.2 Gen 2, max. 10 Gbit/s)
– 1x 3.5 mm combo connector
– Maximum graphics card length: 410 mm
– Maximum CPU cooler height: 160 mm
– Scope of delivery:
– 1x Antec C5 ARGB Midi Tower
– 3x 120 mm PWM fans Reverse ARGB (bottom)
– 3x 120 mm PWM fans Reverse ARGB (side)
– 1x 120 mm PWM fan ARGB (rear)