Shop

Knurled screw-in plug to allow a safe seal of filling opernings or other threads. Seals safely with the integrated O-ring seal. The pictures diplay the top and bottom of the screw-in plug.

Screw-in plug in the new black nickel design!

Phobyas innovative new shroud does not only improve cooling performance, it also offers a whole array of new design possibilities for your system!

Phobyas innovative new shroud does not only improve cooling performance, it also offers a whole array of new design possibilities for your system!

This Y-cable evenly distributes power from the PSU to two additional SATA plugs. Always be sure to have plenty of connectors!

Connection cable between Mainboard and SATA devices.

Extension cable for connection of a 4-Pin Molex fan (CPU fan, case fan etc.) to a PSU connector or other fan connector (4-Pin Molex), approx. 62cm long.

Extension cable for connection of a 4-Pin Molex fan (CPU fan, case fan etc.) to a PSU connector or other fan connector (4-Pin Molex), approx. 32cm long.

A Y-cable to connect 4x3-Pin fans to one 4-Pin power connector.For connection of up to four fans to one 4-Pin Molex power connector. The special feature of this adaptor is the looped-through 4-Pin Molex connector which still allows use of...

A Y-cable to connect 3x4-Pin PWM fans to one 4-Pin PWM connector.As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility.The extension cable is...

An extension for a 4-Pin PWM connector.As fan control via the Mainboard with a PWM fan is much more affordable than a fan controller, this cable is perfect to give more flexibility.The extension cable is sleeved with a black mesh...

Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows...

Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows...

Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every...

Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead.

Phobya Y-Cable 3 pin Molex - 2x 3pin Molex 30cm - black

variable SLI/Crossfire VID connection nipple G1/4 - 2 Slot - black nickel

iable SLI/Crossfire VID connection nipple G1/4 - 1 Slot - black nickel

The bearing is self-adjusting, making the pump consistently quiet in operation over the full life span. The pump is lubricated directly by the coolant (wet-running pump). Therefore no maintenance is required. As the rotor is magnetically held in place even...

It is the product is the new revision.This pump is the worlds first pump which is used in mass-produced watercooled workstations and is ideal for water cooling of processors and suitable electronic components. Due to its size and output can...

This pump is the worlds first pump which is used in mass-produced watercooled workstations and is ideal for water cooling of processors and suitable electronic components. Due to its size and output can also be used in a variety of...

Laing DDC-Pumpe 12V DDC-1RT Plus with 2xG1/4-Outer Thread

The 1, 2 and 3 Slot Variable SLI Connectors allows a clean, safe and convenient connection between multiple full-coverage VGA water-blocks. G1/4 Thread -> G1/4 Thread Distance between the waterblocks: 18,9mm to 30,3mm

This centrifugal pump is designed for uncompromising continuous use. To protect the pump mechanism, it has an integrated pre-filter on the suction side. The base plate of the device is variable, which means there are numerous mounting options.

We recommend this pumps use is intended for submersible inside a reservoir.

We recommend this pumps use is intended for submersible inside a reservoir.

We recommend this pumps use is intended for submersible inside a reservoir.

This High Performance Ceramics centrifugal pump is designed for the thoroughgoing continuous use. It has to protect the pump mechanism has an integrated pre-filter on the suction side. The bottom panel is variable, thus, numerous mounting options given.

This high performance ceramic centrifugal pump is designed for the thoroughgoing continuous use. It has to protect the pump mechanism has an integrated pre-filter on the suction side. The bottom panel is variable, thus, numerous mounting options given.

Aqua Computer is one of the specialists among the manufacturers of high-quality water cooling systems and offers an extensive range of its own developments and at the same time modifies the products of other manufacturers in order to perfectly match...

Aqua Computer is one of the specialists among the manufacturers of high-quality water cooling systems and offers an extensive range of its own developments and at the same time modifies the products of other manufacturers in order to perfectly match...

The word combination aqua computer and reservoir almost always associates an aquatube.