Bitspower Products

This is a black air outlet with G1 / 4-inch thread. This vents the water circuit fully automatically.

The Bitspower cock is the perfect extension for all water cooling systems, which are regularly carried out conversions. Simply turn the stopcock to 90 degrees, then to perform the required work at the water cooler.

To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential.

For the connection of the individual components of the water cooling the choice of the correct connections and their sufficient number is essential.

This Bitspower shut-off valve allows the interruption of a cooling circuit. For this purpose, it has a rotatable G1 / 4-inch internal and external thread, which allows the connection of corresponding connections in a manner that is easy to connect....

The BitSpower NoneChamfer PETG Link Tube is a solid tube and is used to connect several VGA water cooling blocks or other Wakü components. In combination with matching bitspower connections, this tube can be used as an alternative solution for...

The BitSpower NoneChamfer PETG Link Tube is a solid tube and is used to connect several VGA water cooling blocks or other Wakü components. In combination with matching bitspower connections, this tube can be used as an alternative solution for...

With Hard Tubes can be large parts of Tubings - so the tubing - a water cooling system from a single source and without the use of many terminals, angle, tees and other adapters implement.

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components. In combination with matching Bitspower ports can these tube blocks (SLI / CrossFireX) or other...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 16 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower Q adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of five G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also...

This Bitspower 90 degree adapter has two G1 / 4-inch female threads and allows for easy alignment of a water cooling circuit. The Hiding O-ring design of the terminal also allows a complete sinking of the rubber seal of the...

This Bitspower T-Adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of three G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also looks...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 12 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower Multi-Link adapter serves as a 90-degree connector between an acrylic tube with 12 m outside diameter and a watercooling component with G1 / 4-inch female thread. Equipped with black rubber seals sitting the adapter completely safe and provides...

This Bitspower Multi-Link adapter serves as a 90-degree connector between two acrylic tubes with 12-meter outer diameter. Equipped with four black rubber seals sitting the adapter securely on the tube and provides an absolutely tight connection. The chrome finish also...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 16 m outside diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 12 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 14 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 16 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...