- SKU: 32134
- MPN: n/a
- EAN: 4049469077556
The head of this special tool is made of elastic and very hard spring steel and therefore has a very high durability. It serves to separate the Molex connectors from the cables. For this purpose, the tip is pressed into the connections and compressed with the cableon the back side out. D
Molex Pin Remover Tool - ModMyMachine Edition
The head of this special tool is made of elastic and very hard spring steel and therefore has a very high durability. It serves to separate the Molex connectors from the cables. For this purpose, the tip is pressed into the connections and compressed with the cableon the back side out. D
The head of this special tool is made of elastic and very hard spring steel and therefore has a very high durability. It serves to separate the Molex connectors from the cables. For this purpose, the tip is pressed into the connections and compressed with the cableon the back side out. D
- SKU: ZUWS-058
- MPN: R765
- EAN:
- Warranty: 12 Months
Depending on the connection can vary the force required for this purpose. Helpful in some cases is a short reverse pressure by the cable from the remote end can be pushed toward terminal.
After disconnecting the cables are brought to the desired length, fitted with newsheathing or soldered and re-connected to the port. Done! Similarly, the procedure isthe sleeving. This version is suitable for 4-pin Molex connector.
Please observe the safety regulations in dealing with current on the hardware.Modifications can lead to serious problems in this area, failures and accidents, so allconversions done at your own risk.
Technical details:
Material: spring steel
Suitable for removal of cables from the following connection (example):
4-pin Molex
£12.19£10.16 Inc VatEx Vat



