Kolink Citadel Mesh RGB Micro-ATX case - black

With its large mesh front and two pre-installed 120 mm PWM fans with digitally addressable RGB LEDs behind it, the Micro-ATX case skillfully combines an attractive design with extensive performance. Hardware components can be put on display extensively through the tempered glass side door – the perfect case for perfect gaming setups.

The features of the Kolink Citadel Mesh at a glance:
– Large mesh front for perfect airflow
– With a total of three pre-installed 120 mm PWM fans with ARGB LEDs
– Including controller and remote control for lighting
– Tempered glass side door for an unobstructed view inside
– Suitable for Micro-ATX and Mini-ITX mainboards
– Vertical installation of a 2.5-slot graphics card possible (riser card sold separately)
– Installation of a 280 mm radiator on the front and a 240 mm radiator on the lid possible
– I / O panel with two USB 3.0 and one USB 2.0 port and HD audio
– Space for graphics cards up to 345 mm, CPU coolers up to 190 mm and power supplies up to 200 mm
– Kolink Citadel Mesh: Optimized airflow meets a lot of performance

The Kolink Citadel Mesh is delivered with three 120 mm PWM fans that are attached to the front and rear. The fans offer good performance, are quiet at the same time and can be connected to 4-pin fan slots on the mainboard. The main board then takes over the automatic control of the speed via PWM. The front consists of a large mesh and contributes significantly to the good airflow inside the case. The fans are all equipped with digitally addressable RGB LEDs, which can be controlled either via the enclosed controller with remote control or directly via a mainboard equipped with 3-pin slots (5VDG).

The two pre-installed 120 mm fans on the front can be replaced by two larger 140 fans. In addition, two 140 or 120 mm fans can be attached to the lid and another 120 mm fan on the back. If you rely on water cooling, you can attach a radiator up to 280 mm in size to the front, and a 240 radiator can be installed on the lid. At the top there is a magnetic dust filter over the mesh with a honeycomb pattern. The installed hardware can be admired through the easy-to-open tempered glass side door. Magnets keep the door closed.

The perfect case for enthusiasts
The interior is completely black, the power supply cover contributes to a tidy look. There is space in the hard drive cage under the power supply cover for two 3.5-inch or two 2.5-inch drives. Two additional 2.5-inch drives can be attached to the mainboard tray next to the mainboard. Mainboard tray and the power supply cover offer numerous openings for cables and behind the mainboard tray there is plenty of space for cable management with 24 millimeters. The optional ATX power supply, which is up to 200 millimeters long, is located above a removable dust filter.

Graphics cards with a length of up to 345 millimeters fit into the Micro-ATX case, with a radiator installed on the front, the permitted length is reduced to 320 millimeters. CPU coolers can be up to 190 millimeters high. On the I / O panel on the front of the cover there are two USB 3.0 ports of type A and one USB 2.0 port as well as audio connections.