3 Pin Cables

With the help of the aquaero fan controller from the manufacturer aqua computer, various aquabus devices can be read out to control them or to monitor them during operation.

Cable Modders, the U-HD (Ultra High Density) PET Expandable Cable Braided 3Pin to 1x 3Pin Fan Extension Cable.

- Adapter cable for ARGB devices and fans - Single 4-pin connector to two 5V 3-pin headers - Compatible with Kolink Observatory HF and MX PC cases - 400mm cable length - Tinned copper wires for excellent conductivity

An extension cable for 3-pin fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime.

An extension cable for 3-pin fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime.

An extension cable for 3-pin fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime.

Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable. Distributes power supply and RPM singal to multiple fan connectors. Sleeving provides additional protection, stability and longer lifetime.

The Jonsbo Light Cable is the ideal solution for adding impressive RGB lighting to your PC build. This innovative light cable has been carefully designed to not only provide high performance and reliability, but also to create a stunning visual...

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable.

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable.

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable.

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable.

Sleeved 3-Pin to 4x 3-Pin Y-splitter distribution cable.

Sleeved 3-pin to 3x 3-pin Y-splitter distribution cable.

Sleeved 3-pin to 2x 3-pin Y-splitter distribution cable.

With the Watercool Y-Splitter you connect three 4-pin PWM fans with one PWM fan connector.

With this controller you control the ARGB lighting of various components of your PC.

NesteQ 3-Pin extension cables are the easiest and quickest way to expand the reach of a 3-Pin device.

The Kolink 1-3 PWM Fan Splitter Cable is a 1 to 3 PWM fan splitter that allows the user to connect up to three PWM fans from just one PWM fan header on the motherboard.

The aqua computer adapter for RGBpx components is suitable for many mainboards and controls from other suppliers.

The NA-SEC2 Noctua is an accessory kit for the fan, which consists of three fully sheathed, each 30 cm long extension cable for 3-pin fan.

aqua computer Anschlusskabel aquabus/Tacho for aquastream

This Y-cable evenly distributes power from the PSU to 3 Pin 5V and 12V plugs. Always be sure to have plenty of connectors!

Fans with 4-pin PWM connectors are very popular as they enable efficient fan regulation, but are not always easy to operate, especially when used with older mainboards or fan controls. The reason for this is the lack of suitable connections or...

The Dutch of Phanteks began with great processor coolers, which inserts reinvigorating fan from the beginning. Logically, the next step consisted in offering individual fan series. In the third step, this was found again in the fan housings Enthoo series....

The NA SYC2 Noctua is an accessory kit for the fan, which consists of two completely sheathed Y-cable for 3-pin fan.

This can adpater fans or pumps with optional 12V, 7V or 5V operate. Simply connect only the 4 pin Molex connector to the power supply and select a voltage. Eie reduction of the voltage causes the throttling of the rotational...

BitFenix 3-pin to 3 x 3-pin adapter 60cm - sleeved black / black

This connection cable can be used to connect various and multiple Aqua Computer devices via aquabus.

Three-lead cable for connection of flow rate sensors to fan controllers respectively monitoring devices. Length approx. 40cm, plugs on both ends (Special plug on sensor end). The cable can additionally be extended with common 3-Pin fan extension cables.

For connection of three 3-Pin fans (radiator fans, case fans etc.) to one Mainboard connector (3-Pin). Please note that rpm monitoring is possible for only of the connected fans. Sleeving: This cable is not only practical, it is also optically appealing,...

Adaptor for connection of a fan with 3-Pin Molex plug (CPU fan, case fan etc.) to a fan socket on e.g. the Mainboard. This adaptor allows operation of the fan with a voltage of 7V instead of 12V which allows...