Kolink Refine RGB Midi-Tower, tempered glass - black

A powerful gaming setup based on an E-ATX mainboard can be admired through a tempered glass side door, a power supply cover conceals unsightly cable spaghetti. The front made of brushed aluminum in dark gray underpins the chic exterior, which is accentuated by a digitally addressable RGB LED strip placed on the side. The lighting can be controlled via a switch on the I / O panel. Alternatively, the strip can also be connected and controlled directly on a mainboard. And a fine mesh with integrated dust filter on the top ensures proper ventilation. A pre-installed 120 mm fan provides adequate ventilation.

The features of the Kolink Refine Midi-Tower at a glance:
– Chic midi tower for motherboards up to E-ATX format
– Tempered glass side panel with hinges
– Brushed aluminum front in dark gray
– Subtle digitally addressable RGB lighting on the front
– A pre-installed 120 mm fan on the back
– Up to five 120 mm and four 140 mm fans in total possible
– Space for graphics cards up to 380 millimeters, CPU cooler up to 160 millimeters
– I / O panel with control for RGB LEDs, 1x USB 3.1 Type C, 1x USB 3.0 and 2x USB 2.0

Kolink Refine: Lots of space for powerful gaming hardware
Even if the external dimensions correspond to a midi tower, the refine is designed thanks to its sophisticated design to accommodate a mainboard even in E-ATX format. There is also plenty of space for graphics cards with 380 millimeters to the front. At 160 millimeters, there is also enough space for common CPU coolers. A cover hides the power supply and the HDD cage, in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the back of the mainboard bracket.

If you rely on air cooling, you will find enough slots for 120-millimeter fans. Two 120 mm or two 140 mm fans can be attached to the front. Either two 120 mm or two 140 mm fans can be attached to the lid. The lid is provided with a mesh through which air can flow almost unhindered. A dust filter ensures that the hardware inside does not have to be constantly cleaned. At the back, a powerful 120 millimeter fan already occupies the available slot. There is space for a 280-millimeter radiator on the front, and the pre-installed fan on the back can be replaced by a 120-millimeter heat exchanger.

Tempered glass and RGB LEDs skilfully showcase hardware
Sophisticated cable management can be achieved through well-placed bushings and terminals. The spacious interior can be admired through a tempered glass side door, which can also be lifted out by the hinges. A strip with digitally addressable RGB LEDs is attached to the side of the brushed aluminum front. A switch on the I / O panel is responsible for controlling it, including lighting effects. Alternatively, the strip can also be connected and controlled directly on the mainboard. Then the RGB switch on the I / O panel can also be used as a reset button. In addition to the RGB / reset switch, there is also a USB 3.1 Type-C slot, a USB 3.0 slot and two USB 2.0 ports as well as 3.5 millimeter sockets for headphones and microphone and finally a power – and an HDD LED.