Innovatek G-Flow Socket 775
No products found
Product description:
The G-Flow is a new generation of high-end water blocks. With its revolutionary flow guidance is on the performance of the peak cooling technology. The G-flow measurements and has compact and features outstanding craftsmanship. The base plate is made out of nickel plated copper.
The listed block is made for Intel 775 socket system and comes including Cool Laboratory Liquid Pro liquid metal thermal paste.
The G-Flow was designed to use in the cooling liquid to optimal way. It can deliver an outstanding cooling performance even at very low flow rates. Furthermore, the flow resistance is very low, as low as a 2 cm (less than one inch) piece of tubing.
The Innovatek G-Flow CPU block does not have any special requirements regarding the pump or the cooling loop. The flow is fully maintained, as the block can not normally clog.
Technical data:
. High cooling performance
. full metal version (completely made from metal!)
. optimized for modern CPUs with heat spreaders
. Cools every CPU more than enough
. No reduction of the cross-section -> the block can not clog!
. cooling performance is maintained over a long time period
. Minimum pressure loss from the block
. Full cooling performance even at a minimum flow rate of 0.3 l / min
. No special pump needed – minimum flow is enough
. Easiest and safe handling
. Optimized hold-downs for absolutely safe mounting
. Absolutely classy appearance, metal-look
.
The craftsmanship and design of the block fullfil the highest standards.
The visible side of the base plate, Which lies on the core, is very well made and highly flat, Ensuring a very good contact to the CPU. The special coating of the base, being only a few thousands of a millimeter thick, gives the block to even better base and so improves more even heat transfer.
Technical data:
. The weight of the block is app 290g
. Base Plate made out of highly pure copper with nickel plating
. Body made out of aluminum (special coating)
. Depending on aluminum hold-down version
.
Package contents:
. Waterblock with integrated hold-down
. Cool Laboratory Liquid PRO Thermal paste
. Additionally: standard thermal paste (Silmore)
.
.
The block comes with by default 8/10mm Compression Fittings (G 1 / 4 thread). They fit any 8/10mm (8mm inside, outside 10mm) tubing (PVC, PU, etc.)
Note on the Use of the coolant:
Contrary to the opinion of Aquatuning that the customer in the coolant, the free choice, Innovatek takes the view that Innovatek products may only be used with Innovatek refrigerants. Innovatek studied claimed products in terms of the cooling agent and does not accept complaints from principle, for which another coolant was used.
Customers using the products made by Innovatek in its cooling circuit and not cool with Innovatek Protect lose Basically its guarantee and warranty claims on their resurrected Innovatekartikel!
