Game Max Predator RGB Full Tempered Glass Gaming Case MB SYNC 3pin

The height of the Predator makes it great for large components or a custom water cooling loop. Not only do you have great build options but the case comes with four 120mm Spectrum fans pre-installed as well as a PWM hub, RF remote and a 3 pin ARGB motherboard connector allowing you to control all fans synced to the hub via software.

The I/O ports are located on the top panel allowing for easy connection with two USB3.0, two USB2.0, a RGB button, power button and much more. You will also find magnetic dust filters on the top and bottom, easy to use thumb screws and a host of design considerations that make building in this case as easy as possible.

The Predator comes with all the features you would expect to see from cases at a higher price, without the price. We have designed this case to support every type of build without compromise. In line with the Game Max ethos this case offers style, performance and the ultimate experience.

The Game Max Predator is compatible with the following fans:
Rainbow PWM Fan Controller With 2 x Rainbow Single-Ring 120mm Fans

Key Features
Spectrum Fans – Four 120mm Spectrum Fans are pre-Installed, provides great cooling support and a dynamic cyber gaming atmosphere.

PWM Hub – A PWM hub has been included allowing you to connect to 8 6pin fans and 2 3pin ARGB LED strips. From the hub you can control the LED speed, LED mode and fan speed.

RF Remote Controller – The RF remote controller makes it easier to change the colour combinations and you can light up your fans using the several colour modes the fans have to offer, you will never run out of ideas.

Three Sides of Tempered Glass – The Predator comes with three sides of tempered glass offering edge-to-edge interior visibility complementing a clean exterior profile.

Watercooling Ready – Plenty of space for watercooling enhances your cooling options with room for a 1 x 120/140mm/240mm/280mm radiator at the front, room for a 120/140/240/280mm at the top and room for a 120/140mm radiator along with space for mounting a reservoir.

Dust Filters – The pre-installed magnetic dust filters on the top and bottom helps to prevent dust from getting into your build and helps improve the performance of your chassis.

I/O Ports – The USB and HD audio ports are located on the top of the front panel is built with gamers in mind, it is easy to connect to most media storage devices and when building it is easy to disconnect the wires to completely remove the front panel while building too.

Specifications
Chassis Dimensions (Excluding Fascia / Panels): (D) 406 x (H) 510 x (W) 204mm
PSU Shroud : Space For 3 x 120mm Fans

Case Specifications
Form Factor: Full Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 280mm
Supported Radiator Positions: Front, Top
Body Material: 0.6mm SPCC
Front Bezel Material: Tempered Glass
Side Panel: Tempered Glass
Internal Cable Management Depth: 24mm
External Bays:
Internal Bays: 2 x 3.5 Internal
5 x 2.5 Internal
Drive Bay Notes: 2 x 2.5 share 2 x 3.5 HDDs
Expansion Slots: 7 x Full Size
Cooling Front: Space For 4 x 120mm or 2 x 140mm Fans (4 x 120mm Single-Ring Spectrum Fans inc.)
Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans
Cooling Rear: Space For 2 x 120mm Fans
Cooling Side: None
Cooling Bottom: None
Fan Controllers: 0 Fan Controllers, controlling up to
0 fans in total
IO Ports: 2 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 360mm
CPU Cooler Maximum Height: 175mm
Front Bezel Colour: Black
Body Colour: Black
System Cabinet Features:
PSU Included: No

General Specifications
Manufacturer Part Number: PREDATOR
EAN Number: 5055492407771
Has Mains Plug: No
Colour: BLACK