Bitspower Products

The Bitspower None Chamfer Brass Hard Tube is a stable and durable tube for water cooling, which is made of brass.

This is a double pack with two black air outlets with G1 / 4-inch thread.

The Bitspower Touchaqua water outlet is a practical accessory for water cooling circuits.

The Bitspower Touchaqua water outlet is a practical accessory for water cooling circuits.

This is a double pack with two straight adapters from Bitspower Touchaqua.

The Bitspower cock is the perfect extension for all water cooling systems, which are regularly carried out conversions. Simply turn the stopcock to 90 degrees, then to perform the required work at the water cooler.

To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential.

Bitspower offers a wide range of water cooling products ranging from heat sinks, fittings and radiators to pumps and hoses.

For the connection of the individual components of the water cooling the choice of the correct connections and their sufficient number is essential.

This Bitspower shut-off valve allows the interruption of a cooling circuit. For this purpose, it has a rotatable G1 / 4-inch internal and external thread, which allows the connection of corresponding connections in a manner that is easy to connect....

The BitSpower NoneChamfer PETG Link Tube is a solid tube and is used to connect several VGA water cooling blocks or other Wakü components. In combination with matching bitspower connections, this tube can be used as an alternative solution for...

The BitSpower NoneChamfer PETG Link Tube is a solid tube and is used to connect several VGA water cooling blocks or other Wakü components. In combination with matching bitspower connections, this tube can be used as an alternative solution for...

With Hard Tubes can be large parts of Tubings - so the tubing - a water cooling system from a single source and without the use of many terminals, angle, tees and other adapters implement.

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components. In combination with matching Bitspower ports can these tube blocks (SLI / CrossFireX) or other...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 16 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...

This Bitspower 90 degree adapter has a G1 / 4-inch female thread, a G1 / 4-inch external thread and can be rotated in three places 360 degrees. Not only does the installation a breeze, the course of a water cooling...

This Bitspower Q adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of five G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also...

This Bitspower 90 degree adapter has two G1 / 4-inch female threads and allows for easy alignment of a water cooling circuit. The Hiding O-ring design of the terminal also allows a complete sinking of the rubber seal of the...

This Bitspower T-Adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of three G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also looks...

This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 12 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides...