With the RevolverSX series of American producers and watercooling specialist PrimoChill presents its own colorful Compression fittings suitable for acrylic, PETG, PMMA Tubes. This version is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 13 mm outer diameter. Equipped with nut connection holds hoses especially firmly and is very well protected against leakage thanks to a rubber seal. The UV Green design also looks very cool and will leave a lasting impression on any viewer.
With the RevolverSX series of American producers and watercooling specialist PrimoChill presents its own colorful Compression fittings suitable for acrylic, PETG, PMMA Tubes. This version is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 13 mm outer diameter. Equipped with nut connection holds hoses especially firmly and is very well prote...
With the RevolverSX series of American producers and watercooling specialist PrimoChill presents its own colorful Compression fittings suitable for acrylic, PETG, PMMA Tubes. This version is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 13 mm outer diameter. Equipped with nut connection holds hoses especially firmly and is very well prote...
No products found
The PrimoChill RevolverSX fitting at a glance:
Compression Fitting in UV Green for connecting a watercooling component with a tube
G1 / 4-inch male thread for high compatibility
Hose connection for hoses with 13 mm outer diameter
Made of high quality brass and aluminum
Sealed by rubber ring (O-ring)
How does a compression fitting and what is it good?
With the series of RevolverSX ports that are reminiscent of a revolver cylinder, the Americans provide the ideal Compression Fittings (own) Tubes before, which make a highly flexible and individual Wasserkühlungsverschlauchung possible by being trim itself and turn in any radius can, after they have been heated sufficiently.
When connecting such a tube with a condenser or other watercooling component, then either ideally back to such a special connection because so the one hand, the tube is fixed to the nickel-plated brass fitting, on the other hand, the nickel-plated coupling nut in fluorescent UV Green from aluminum but not too much pressure on the fragile Rigid Tube exercises.
So that adequate sealing is given and no coolant escapes between the tube and connector, the RevolverSX fitting has a sealing ring (O-ring) of rubber. The knurled nut has here for a good grip when tightening a fine diamond pattern. The Compression Fitting itself takes a rigid tube on with 13 mm outer diameter and has on the other side via a G1 / 4-inch male thread.
Technical details:
Dimensions: 12.5 x 24 mm (height x diameter)
Material: Nickel plated brass (fitting), aluminum (nut)
Color: Green UV fluorescent (nut), silver (fitting)
Connections:
1x G1 / 4-inch male thread
1x connector for tubes with 13 mm outside diameter
