Monsoon Hardline Pro Mandrel Kit 16 / 13mm (ID 1.2 OD 5/8)

Angle at 45 degrees, 90 degrees, 180 degrees and 360 degrees. The angles have support arms that hold the hose in the desired position during the bending process and on the desired angle can be adjusted. The angles have a common channel, which helps the roundness of the tube to obtain the bending process. This makes the pipe planning quite simple, since otherwise known issues from the inside and outside bend radius and Abnkicken are practically excluded. The angles have several holes with which they can be attached to bending boards, so that the piping can not be performed accurately. 
 
The angles have been colored anodized aluminum and for a very long shelf life. The central channel is polished to scratches / retreating to avoid the pipe in the bending process. There are laser engraved information on the angles which indicate the radius of up to 1 degrees steps. 
 
The angles are marked in color depending on the pipe outside diameter. The red triangles are for 16mm (8.5 OD) and the blue angle of 13mm (2.1 OD) 
 
In addition, in the kit are screws, retaining clips and contain tool, which are necessary for carrying out a bending process pro 
Full silicone hose insert is placed in which the acrylic tube to prevent effectively the bending process, the bending of the tube. The silicone ring is made specifically for acrylic tubes and ensures easy threading and removal