Monsoon Chain Gun Hardline Comp. Fitting 13/10mm - white

The Chain Gun -Fittings depend entirely clear to watercooling modders who are looking for a Compression Fitting with that special something. As the name suggests, the connections are kept in a very exceptional design theme: The multi-part nut here looks like a machine gun type a Gatling Gun. 

This compression fitting for acrylic tubes with 13 and 10 mm outer and inner diameter works in such a way that first the black and white nut (compression ring) is inserted in the tube and then the supplied Plexiglas collar (lock collar) is glued to the last millimeter of the tubes with a suitable adhesive *. 

The silver brass base of the terminal with their G1 / 4 inch thread will now be equipped on both sides with respective sealing rings. After the glue dried and the plexiglass collar is fixedly connected to the hardline Acrylic tube, you screwed careful nut and base, wherein the compression ring thanks to its colored webs can be good lock with your fingers. 

The sealing effect in Monsoons Chain Gun Hard Line connection arises from the fact that the rear ring of the coupling nut has a smaller diameter than the plexiglass collar and this therefore suppressed when screwing in the direction of connection or seal ring. 
* Note: To use the Chain Gun Hard Line terminals with acrylic tubes necessarily suitable adhesive is required! Monsoon provides a corresponding 8-ml vials yourself at (559 WAZU-in Dealer-range). 

Technical Details: 
Compatibility: acrylic tubes with 13/10 mm outer / inner diameter 
Thread: G1 / 4 inch 
Color: Black, White 
Material: Brass