EK Water Blocks EK-FC980 GTX TF5 - Acetal + Nickel

The problem is exacerbated by their own overclocking, because as temperatures can reach critical levels. In short: Who wants in games or even operating at Benchen a low setting and possibly simultaneously wants to turn the clock screw is barely past a water cooling. In addition to the usual components (radiator, pump, reservoir) a suitable cooler for MSI GeForce GTX 980 Gaming 4G is of course necessary to – as this model of watercooling specialists EK Water Blocks.

There is a full-block design, which covers all relevant sources of heat the graphics card and thus effectively cools – so the GPU, memory and voltage regulators. This electrolytic copper and an optimized channel structure are used to transfer heat to the optimum. For better protection and an individual look, the copper was covered in this version with a silver nickel layer.

The cover is made of acetal, a robust and heat-resistant special plastic. The connection terminal has four holes (1/4-inch thread). The flat design of the radiator and the connection of multiple graphics cards in an SLI configuration is z. B. by EK-FC terminal problem (but without compatibility with EK-FC Bridge or EK-FC Link).

Notes: For integration into the cooling circuit connections are needed, which are not supplied. For this, 1 g of thermal paste and thermal pads are included to establish contact between cooler and video card. It is important to ensure that the cooler is designed exclusively for MSI graphics card from the GeForce GTX 980 Gaming 4G in the custom design and Twin Frozr V Cooler! The original radiator must be removed before installation, so the warranty expires!

Technical details:

    Material: Nickel plated electrolytic copper (ground), acetal (cover)
    Thread: 4x G1 / 4 inches
    Compatibility:
    MSI GeForce GTX 980 Gaming 4G (GM204, 4096 MB, Custom-Design)