Aerocool GT-S - Black

After AeroCool with the Strike-X already has a mid-tower on the market, which went through its unique aggressive style attention to itself, it is now another train on this track, which carries the extension GT for gaming tower and the previous X-Strike in no way inferior.

The first is the appearance of the Strike X-GT. The front offers a sight that can be cringe every opponent. Two large X over the mesh grille convey a clear message: Do not cross my path. The same style elements can be found on the lid, where the letter is embedded as a depression in the mesh grid. In the cover in addition to three USB 2.0 and USB 3.0 port is provided which is connected to an external output motherboard.

Red accents in the form of two pre-installed 120 fans (1x front, 1x rear), the PCIe panel and the plastic holders for quick mounting of up to three optical drives can not affect the X-Strike GT harmless. It provides the mid-tower space for a total of seven fans (two 120 in the front, one in the rear, two on the side panel and either two 140s or 120 in the cover).

With these optional features is ensured that a maximum of seven expansion cards get fresh air and can be cooled effectively to six volumes in the format 3.5 inch or 2.5 inch. If it should still be too warm in continuous 5.25-inch bay, can be installed under each 120 fans each frame, on the one HDD or SSD is screwed.

One such framework is also responsible for the option of a second fan in the front by the frame is screwed there upright with fan – a practical multi-solution. Practically, it is also in the area of ​​the black-painted Mainboardtrays, while allowing for multiple hook the bundling of cables, the latter can be defined by four large openings behind the board holder.

In the area of ​​the main processor, there is a large opening for changing CPU coolers require a backplate. Also, most large tower cooler should fit into the Strike X-GT, after all, he offers up Mainboardtray sidewall of about 17.5 inches square. In the soil a dust filter is glued so that the underlying power supply itself then sucks clean air, when mounted with fan downward.

Warm air will be carried out next to the power supply and fan-tail on the red PCI-mesh panels. These can be removed with thumb screws and replace. In addition, two hose bushings are at the rear to allow an external water cooling. Finally, the fold-out feet provide a firm base, because one thing is clear: The Strike-X GT does not avoid, it is more than evaded.

Note: The lighting in the photos was amplified using optional cathode.

Technical details:
Dimensions: 190 x 465 x 490 mm (W x H x D)
Material: steel, plastic
Color: Black
Weight: 6.06 kg
Form Factor: ATX, Micro ATX
Fan:
1x 120mm (front, 23 dB (A), 1.200 U / min, Red LED)
1x 120mm (front optional)
1x 120mm (rear, 23 dB (A), 1.200 U / min, Red LED)
2 x 120 mm (side panel, optional)
2x 120/140 mm (lid, optional)
Filters: below
Drive Bays:
3 x 5.25 inches (external)
6x 3.5-inch / 2.5 inch (internal, in the 5.25-inch bay)
Power Supply: Standard ATX (optional)
Expansion Slots: 7
I / O panel:
1x USB 3.0
3x USB 2.0
1x each Audio In / Out
Maximum graphics card length: 295 mm
Features:
USB 3.0 port
Cable Management
Tool-free installation of optical drives
Cooling water preparation