Zalman Z9 Iceberg Midi Tower - white [Z9 Iceberg White]

The housing offers plenty of space for high-performance hardware and large radiators. Three additional expansion slots allow graphics cards to be installed vertically. The large side panel made of tempered glass allows you to admire the installed components and the numerous ventilation openings ensure good airflow.

The features of the Zalman Z9 Iceberg Midi Tower at a glance:
- Chic midi tower in white
- Side panel made of tempered glass
- Two 140mm fans pre-installed
- Accommodates up to seven 120mm case fans
- Alternatively, up to six 140 mm case fans are possible
- Space for two radiators up to 360 mm
- Graphics cards up to 390 mm, vertical installation possible, CPU cooler up to 185 mm
- Includes adjustable support for graphics cards
- Three vertical expansion slots for installing a graphics card

Zalman Z9 Iceberg: Stylish midi tower with plenty of space for fans and radiators
Zalman equips the Z9 Iceberg with extensive options for placing case fans. A total of up to seven 120 or six 140 fans can be distributed in the case: three 120 or 140 mm fans on the front, three 120 or two 140 mm fans on the lid and one 120 or 140 on the back wall. Alternatively, two large 200 mm fans can be installed on the front for high airflow at low speeds. Processor coolers are supported up to a maximum height of 185 mm. Two 140 mm fans are pre-installed ex works.

If you would rather install a custom or complete water cooling system instead, the Z9 Iceberg has a lot to offer: a 360 triple or 240 dual radiator can be attached to the front and the lid, and a single radiator can be attached to the back wall. Radiator with 120 or 140 mm. This means that even heavily overclocked systems are effectively cooled and run at low temperatures even under constant load. Removable dust filters are integrated into the top panel and below the power supply slot for easy cleaning.

Plenty of space for drives and numerous ports
The Zalman Z9 Iceberg offers the ability to accommodate numerous drives. The included modular drive cage holds two 3.5- or 2.5-inch drives and can be moved within the power supply bay if necessary. This then allows the installation of particularly large radiators up to 360 mm long. In the standard configuration with HDD cage, power supplies up to 270 mm long can be installed. If this is omitted, space is created for power supplies up to 390 mm long. Either two additional 3.5-inch or three 2.5-inch drives can be accommodated on the back of the motherboard tray.

The I/O panel of the Zalman Z9 Iceberg is equipped with two USB 3.0 and USB 2.0 ports, as well as a USB 3.1 Type C port. There are also two 3.5mm jack sockets, one of which acts as a headphone output and the other as a microphone input. In addition to the reset and power button (with LED to monitor the HDD), there is also a button to control the LED lighting.

Chic design and clever details
The front of the midi tower is particularly striking. The angular design with sloping surfaces is stylish and at the same time offers wide cutouts for side ventilation slots. The left side panel is made of tempered glass and allows an unobstructed view of the installed hardware. The housing is completely white to match. The power supply slot ensures a tidy interior as it cleverly hides the power supply and its connection cables. On the back of the motherboard tray there are three Velcro fasteners and several openings for convenient cable management.

There are seven horizontal slots for expansion cards on the back of the case. Graphics cards up to a maximum length of 390 mm can be installed here. The Zalman Z9 Iceberg includes an adjustable graphics card support to prevent particularly heavy cards from sinking. In extreme cases, this can cause the cooler to detach from the PCB. Alternatively, the graphics card can also be installed in the three vertical expansion slots. In combination with the side wall made of tempered glass, it comes into its own particularly well.

Technical details:
- Dimensions: 245 x 496 x 473 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 9.6 kg
- Color white
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 / 3x 140 / 2x 200 mm* (front) *200 mm with a maximum height of 25 mm
- 3x 120 / 2x 140 mm (lid)
- 1x 120 / 1x 140 mm (back)
- Of which preinstalled:
- 1x 140 mm (front)
- 1x 140 mm (back)
- Filter: base, lid (removable)
- Radiator mountings (with some HDD cages being omitted):
- 1x max. 360 / 280 mm (front)
- 1x max. 360 / 280 mm (lid)
- 1x max. 120 / 140 mm (back)
- Drive bays:
- 2x 3.5/2.5 inches (internal, in ODD/HDD cage)
- 3x 2.5 inches or 2x 3.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
- Vertical (65mm): 3
- I/O panel:
- 2x USB 3.0
- 2x USB 2.0
- 1x USB 3.1 Type C
- 2x 3.5 mm jack (audio in/out)
- 1x LED control button
- 1x power button with HDD LED
- 1x reset button
- Maximum CPU cooler height: 185 mm
- Maximum graphics card length: 390 mm
- Maximum power supply length: 270 mm (390 mm if there is no HDD cage)

Scope of delivery:
- 1x Zalman Z9 Iceberg Midi Tower - white 2x 140 mm fans
- 1x HDD cage
- 1x graphics card support
- 1x PCIe riser card holder
- 8x zip cables
- various screws and standoffs
- 1x user manual