Hyte Y60 Midi Tower, Tempered Glass - black [CS-HYTE-Y60-B]

- Tempered glass side panel and front
- Fresh air supply on the ground
- Vertical mounting of the graphics card possible
- PCIe 4.0 riser cable included
- Radiators on the side, in the lid or on the back possible
- Graphics cards up to a length of 375 mm possible
- Maximum CPU cooler height of 160 mm
- Exceptional design and functionality

With the Hyte Y60, you enter completely new realms when it comes to the look of your PC build. With its front and its large, three-part panorama window made of tempered glass, the Midi-Tower offers you a panoramic view of your hardware and not only lets you look at it from the side. With built-in ventilation slots on the floor and on the side of the case, you can optimally supply your hardware with cool air.

In addition, it leaves you open whether you prefer water or air cooling of your components. Due to the extraordinary arrangement, the Y60 is optimally prepared for both variants.

The horizontal PCI slots are low profiles. Optionally, you can mount your graphics card vertically with the included PCIe 4.0 riser cable to show everyone.

Good airflow through cold floor cooling
The Hyte Y60 can accommodate large components with high energy requirements. Therefore, the housing is very open and designed for trouble-free airflow. Through the cold floor, fresh air is sucked in from below and transported unhindered into the interior of the housing. There it meets the most important and warmest components such as CPU and GPU and ensures very good cooling. Due to the many possibilities for fans, the heated air is quickly and efficiently transported out of the case.

On the floor there is space for either 2x 120mm fans or 2x 140mm fans. Three 120 fans fit on the lid, two 120 mm or two 140 mm fans on the side and 1x 120 mm fans on the back. Dust filters that are easy to clean against dust are also attached to the lid, bottom and side.

If you are planning to install water cooling, you will not be disappointed here either. On the side there is enough space for a 280 mm radiator with a maximum height of 150 mm. At the top of the housing, radiators up to a size of 280 or 360 mm can be placed. The back offers the possibility to use a 120 mm radiator, for example for small all-in-one water cooling.

Space for components and vertical GPU
The Y60 offers the ability to install E-ATX, ATX, Micro-ATX and Mini-ITX motherboards. Thus, you have a large selection of platforms and configurations. In addition, CPU coolers up to a height of 160 mm and high-end graphics cards up to a maximum length of 375 mm can be accommodated. If you want to present your graphics card in the large window, you can optionally mount it vertically. The required riser cable is already included in the scope of delivery.

Due to its placement behind the motherboard, the power supply is shielded from the rest of the case. This ensures that the waste heat from the power supply does not enter the main chamber of the case, where the other warm components are located and thus lower temperatures are achieved inside the housing. Due to the orientation of the power supply, it draws fresh air from the side and not from the floor. This helps against dust and ensures a longer life of your power supply. For power-hungry hardware, optional ATX power supplies up to 235 mm in size (with cables) can be placed under the cover.

Mounting options for data carriers and I/O panels
In the Y60 there are enough mounting options for data carriers. Two 3.5- or four 2.5-inch data carriers can be accommodated. This gives you enough memory for your games and applications.

The simple, aquarium-like design of the Y60 makes it possible to build even inconspicuous builds with good cooling performance. The side panel and front is made of tempered glass, which is why it provides a good view of the internal components. Thus, nothing stands in the way of an eye-catching RGB build. The I/O panel doesn't let fans of mobile media down. It comes with power button, reset button, 3.5mm combined audio and microphone port, as well as two USB 3.0 Type-A ports and a USB 3.1 Type-C port for faster file transfer. In addition, it is angled and facing you.

Specifications:
- Dimensions: 285 x 462 x 456 mm (W x H x D)
- Color: Black
- Material: SPCC steel, ABS plastic, tempered glass
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 2x 120mm / 140mm (side)
- 3x 120mm (lid)
- 1x 120mm (back)
- 2x 120mm / 140mm (bottom)
Fan pre installed:
- 3x 120mm fans
Radiator mounting:
- 1x max. 280 mm (side, max. 150 mm height)
- 1x max. 280 / 360 mm radiator (top)
- 1x max. 120 mm (back)
- Dust filter: bottom, side and top (removable)
Drive bays:
- 2x 3.5 inches or 4x 2.5 inches
- Power supply: 1x standard ATX up to 235 mm length (incl. cable)
- Expansion slots: 6 Low Profile + 3
I/O panel:
- 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB 3.1 (Type C, USB 3.2 Gen 2, max. 10 Gbit/s)
- 1x audio/microphone connection combined (3.5 mm)
- Maximum graphics card length: 375 mm (max. 75 mm width, without front radiator)
- Maximum CPU cooler height: 160mm
- Manufacturer's warranty: 3 years
Scope of supply:
- 1x Hyte Y60 Midi Tower, Tempered Glass - black
- 3x 120mm fans (pre-installed)