Watercool HEATKILLER NSB Rev3.0 [10201]

The location of the holes is not important, because the cooler can still be aligned parallel to the board.
The base plate is made of high-purity electrolytic copper and has a very efficient cooling structure, the flow resistance of the cooler is extremely low. Despite its small external dimensions (39x39mm) are the threaded holes (G 1 / 4 inch) 22mm wide apart.

The upper part consists of high-purity copper, the support and applications of polished stainless steel. To prevent tarnishing of the copper, the top is sealed with a special clear lacquer.
The HEATKILLER ® SB 3.0 is primarily intended for mounting on the South Bridge. By the unilateral flattening the cooler can be mounted or even if a PCIe slot on the same level of South Bridge is.

Details:
• Material: Electrolytic copper, stainless steel
• Dimensions (Block) (LxWxH) 39 x 39 x 18mm
• Weight: about 150g
• Pressure tested: 5 bar
• Seal: EPDM 75 (max. 150 ° C)
• Connection: G ¼ (DIN ISO 228-1)
• Thread distance: 22.0 mm

Included:
1x HEATKILLER ® SB Rev3.0
1x bracket (43.0 to 59.0 mm)
1x bracket (59.5 to 79.2 mm)
1x mounting hardware / instructions