Jonsbo D500 E-ATX big tower case, tempered glass - black [D500 BLACK]

Tempered glass side panel on hinges makes installation easier
Suitable for motherboards up to E-ATX form factor
For graphics cards up to a length of 480 mm, vertical installation possible
Up to ten HDDs or eleven SSDs possible, slot for optical drive
Modular design, installation of the power supply either at the top or bottom
Space for up to seven 120 or 140 fans, three 120 fans pre-installed
Installation of radiators up to 420 mm and 360 mm possible at the same time
ARGB lighting on power supply cover and front, hub included
The Jonsbo D500 big tower

The Jonsbo D500: spacious big tower
The Jonsbo D500 Big Tower with its aluminum outer shell offers you plenty of scope when designing your perfect gaming rig. Its extensive interior has space for well-cooled high-end hardware, such as an E-ATX motherboard including graphics cards from the 4000 series from NVIDIA or the 7900 series pixels from AMD. Even as a content creator or fan of memorable workstations, you can showcase your creativity with the elegant case.
The Jonsbo D500 big tower

Convertible for gaming setups or workstations
To make installing your hardware easier, the left side panel made of tempered glass is attached to hinges so that it can be opened or can be removed completely. The back can be adjusted to attach the power supply either at the bottom or under the lid. You can then remove the power supply cover and thereby ensure optimal airflow from below.
The Jonsbo D500 big tower

Perfect for air and water cooling
Speaking of airflow and cooling: up to seven fans in sizes 120 or 140 mm fit into the Jonsbo D500 big tower, three of which you can attach to either the lid or the base, depending on your preferred layout; three on the front and one on the back. Two 120 mm PWM fans are already pre-installed on the front. There is also one on the back that is also equipped with ARGB lighting.

Dust filters on the base, lid and front protect your top hardware. Radiators up to a size of 420 mm have space on the front and lid or base. A CPU cooler can be up to 190 mm high.

The Jonsbo D500 big tower
Ideal for data collectors
One of the outstanding features of the Jonsbo D500 Big Tower is the possible number of data storage devices that can be accommodated in it. In addition to the mainboard tray, there are slots for up to eight HDDs or SSDs. A removable cover hides the data carriers from view through the tempered glass side panel.

Even more discreetly, two 3.5-inch and three 2.5-inch data storage devices can be attached to the back of the mainboard tray. Also unusual these days: if you remove the mesh front, you have access to an optional 5.25-inch drive.

The Jonsbo D500 big tower
Plenty of space for graphics cards, even when mounted vertically
If you leave a gap between the front-mounted drives, you can install a graphics card up to 480 mm long. The GPU can still be up to 340 mm long if you fill all drive slots. You can also install your Pixelbolide vertically if you get a corresponding riser cable.

The Jonsbo D500 big tower
ARGB lighting including a hub for creative people
To get started with your creative design of the Jonsbo D500 Big Tower, there are two ARGB strips on the power supply cover and under the I/O panel with USB-C port. They are connected to the included 3-pin ARGB hub, which you in turn connect to your ITX to E-ATX motherboard to control the lighting. The hub supplies up to four RGB components with power via SATA.

Technical details:
- Dimensions: 250 x 586 x 620 mm (W x H x D)
- Material: Steel (chassis), aluminum (2 mm; front, lid, right side), tempered glass (left side)
- Weight: approx. 20 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 140 / 120 mm (front)
- 2x 140 / 3x 120 mm (front, with ODD installed)
- 3x 140 / 120 mm (lid, with power supply on the floor)
- 2x 140 / 3x 120 mm (lid, with ODD installed)
- 3x 140 / 120 mm (base, with power supply on the lid)
- 1x 140 / 120 mm (back)
- Of which preinstalled:
- 2x 120 mm PWM (front)
- 1x 120 mm PWM ARGB (back)
- Radiator mountings:
- 1x 420 / 360 / 280 / 240 / 120 mm (front, max. 57 mm depth with HDDs)
- 1x 360 / 280 / 240 / 120 mm (front, with ODD or 420 mm radiator installed on the lid)
- 1x 420 / 360 / 280 / 240 / 120 mm (lid, with power supply on the floor)
- 1x 360 / 280 / 240 / 120 mm (lid, with 420 mm radiator installed on the front)
- 1x 280 / 240 / 120 mm (lid, with ODD installed)
- 1x 420 / 360 / 280 / 240 / 120 mm (base, with power supply on the lid)
- 1x 140 / 120 mm (back)
- Filter: front, lid, base (removable)
- Drive bays:
- 1x 5.25 inch (external)
- 8x 3.5 / 2.5 inches (internal; next to the mainboard tray)
- 2x 3.5 inches (behind the motherboard tray)
- 3x 2.5 inches (behind the motherboard tray)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 8 + 3
- I/O panel:
- 2x USB 3.0
- 1x USB 3.2 Type C
- 2x audio
- Max. CPU cooler height: 190 mm
- Max. graphics card length without HDDs: 480 mm
- Max. graphics card length with HDDs: 340 mm
- Max. power supply length: 220 mm (top and bottom)