Fractal Design Meshify 2 RGB Midi Tower, Light Tint, Tempered Glass, black [FD-C-MES2A-06]

- Mesh front on hinges with separate, modular dust filter
- 9 fans possible - 4x 140 mm pre-installed
- Space for 360 radiator on the front and in the lid
- Graphics cards up to 450 mm (290 mm in storage layout) & CPU coolers up to 185 mm
- Magnetic dust filter on the lid, removable dust filters on the bottom and front
- Up to 14x 2.5"/3.5" HDDs & 4x 2.5" SSDs & 3 multibrackets
- Front panel with 1x USB 3.1 Type C, 2x USB 3.0 Type A and audio in/out

Fractal Design Meshify 2 RGB: Airflow case with tempered glass side panel
The Fractal Design Meshify 2 RGB Midi Tower shines with large mesh areas in the front and on the lid. This variant of the case from Fractal Design's Meshify series is able to accommodate large E-ATX boards up to 285 mm. Fractal Design also relies on a modular structure here. The case can be expanded to a maximum of 18 drives (storage layout) with up to 14 trays and 4 SSD brackets, as well as 3 multi-brackets mounted on the top. The versatile multibrackets allow unused fan positions to be converted into holders for drives, pumps or expansion tanks. The side panels can be opened without tools and allow easy access to the interior.

Visually it stands out with its stylish design and the metal mesh grille that hangs on hinges. There is a removable dust filter behind it. The mesh consists of asymmetrically distributed triangles that are modeled on the surface of diamonds. You can set colorful accents with the stylish RGB lighting and the integrated RGB controller. The tempered glass side window is slightly tinted and allows a good view of the installed hardware. Thanks to the mesh elements, the Meshify 2 RGB has good airflow inside and can also accommodate powerful gaming hardware and up to four radiators.

The Fractal Design Meshify 2 RGB: Midi tower in a modular design
A large mesh area dominates the front of the Meshify 2 RGB midi tower from Fractal Design and the asymmetrical diamond structure of the metal grid creates an impressive 3D effect. The front is attached to hinges and can be easily opened. The fine dust filter behind it can be removed to further optimize the already good airflow.

Perfect for water cooling
A 280 or 360 mm radiator can be installed behind the front. There is also space for a large 360 radiator in the lid. Alternatively, three 120 or 140 fans can be installed there. There is still space on the bottom for a 240 mm radiator or two 120 mm or 140 mm fans.

Optimized for many drives
The modular design of the Meshify 2 RGB midi tower from Fractal Design is particularly beneficial for those who need plenty of hard drives for their design workstation. As standard, there are six mounting locations for 3.5- or 2.5-inch drives in the drive cage and behind the power supply cover. There are also two dedicated 2.5-inch slots directly on the back of the mainboard tray. If you forego extensive fan equipment and instead install multibrackets in the top and bottom area of the case, you can install additional drives on these, giving you up to 18 drives (14x 3.5-/2.5-inch, 4x 2.5 -Customs service).

Plenty of space for gaming hardware
.
Graphics cards can be up to 450 mm long with installed front fans. If you use the storage layout, there is 290 mm of space. In addition to E-ATX, ATX, Micro-ATX and Mini-ITX mainboards, up to nine expansion cards can be installed in the case.

CPU coolers with a height of up to 185 mm can be installed in the Fractal Design Meshify 2 RGB. PSUs can be up to 250mm long if the HDD cage is retained. They disappear under a power supply cover. It has a removable flap on the front, for example to create space for a front radiator or to make it easier to install fans or a radiator on the floor.

Well equipped
The I/O panel is attached to the top of the elegant case. The I/O panel has a USB 3.1 Type-C, two USB 3.0 ports and two audio jacks as well as the beautifully designed power button and an inconspicuous status LED. Three Fractal Design Dynamic X2 GP 140 mm fans provide very strong airflow from the factory and remain very quiet. Up to six additional fans can be mounted in the lid, front and base. You will also find controls for the RGB lighting on the I/O panel.

Case fans or radiator fans can be connected to the integrated fan hub, which is powered via a SATA cable and can be connected to a motherboard to receive a speedometer signal. Three 4-pin fans and six 3-pin fans can be connected to the hub itself.

Technical details:
- Dimensions: 240 x 474 x 542 mm (W x H x D)
- Material: steel, plastic
- Weight: approx. 11.1 kg
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 / 140 mm (front)
- 1x 120 / 140 mm (back)
- 2x 120 / 140 mm (floor)
- 3x 120 / 140 mm (lid)
- Of which preinstalled:
- 3x 140 mm (front)
- 1x 140 mm (back)
- Dust filter: front, bottom, lid
- Radiator mountings:
- 1x max. 280 / 360 mm (front)
- 1x max. 120 mm (back)
- 1x max. 360 mm (lid)
- 1x 240 / 280 mm (floor)
- Drive bays:
- Standard layout:
- 6x 3.5-/2.5-inch (internal)
- 2x 2.5 inches (internal)
- Storage layout:
- 14x 3.5-/2.5-inch (expandable with optional drive mounts and multibrackets
- 4x 2.5-in
- Power supply: 1x standard ATX (optional) up to 250 mm length with HDD cage installed
- Expansion slots: 7+2 (vertical)
- I/O panel:
- 1x USB 3.1 Type C
- 2x USB 3.0
- 2x 3.5 mm jack (1x audio in/out each)
- Maximum CPU cooler height: 185 mm
- Maximum graphics card length:
- Standard layout:
- 450mm
- Storage layout:
- 290mm