Lian li LANCOOL III E-ATX case, midi tower - white [Lancool III White]

- Tempered glass side doors with magnetic closure
- Large mesh surfaces for excellent airflow
- Space for graphics cards up to 420 mm long
- Suitable for radiators up to 420 mm
- Elegant cable management for a particularly tidy look
- Includes four 140mm fans, up to ten fans possible
- Up to twelve data drives such as SSDs and hard drives are possible at the same time

LANCOOL III: Midi tower for efficient air and water cooling
Anyone who relies on classic air cooling will be delighted with this case, because the LANCOOL III offers options for installing a total of ten fans. Four 140 mm fans are pre-installed in the LANCOOL III ex works: three on the front and one on the rear wall. A maximum height of 185 mm is intended for CPU coolers.

- 3x 120 or 140 fans on the front
- 3x 140mm fans in the lid
- 3x 120mm fans or 2x 140mm fans on the PSU shroud
- 1x 140mm fan on the rear panel of the case

The LANCOOL III can also be used to install complete and custom water cooling systems without any problems. A 360 triple radiator can be placed on the front and on the power supply cover. There is even room for a massive 420 mm radiator for extremely powerful hardware in the lid. Removable brackets make installation easier. The bracket on the lid also offers a G1/4 inch drain/fill port to quickly and easily fill or empty your water cooling system.

Chic design with excellent airflow
The LANCOOL III was specifically designed with the cooling of powerful hardware in mind and offers numerous air intakes: Surrounded by an aluminum frame, the front is characterized by a large and fine mesh, through which the front fans are supplied with fresh air, but dust is not in inside. The lower part of the frame features an aluminum plaque with the manufacturer's name. The back, the lid and the bottom of the case also have generous air inlets and outlets.

But the LANCOOL III not only has a lot to offer functionally, but also visually: The side walls made of tempered glass guarantee an uninterrupted view of your built-in hardware. Both side panels are attached to hinges on the back of the case and fold out backwards, eliminating the hassle of tightening screws.

Sophisticated cable management
Lian Li has managed a special trick when closing: The side doors are closed by magnets without any screws. The aluminum cover panels, which open downwards, provide additional support. These allow easy access to the power supply and drives.

Lian Li also had a particularly clean look in mind when it came to cable management. A total of eight Velcro fasteners allow you to bundle unsightly cables. Four are located on the back of the motherboard tray around the motherboard's CPU socket, one further down for 24-pin cables, and three on the back of the front panel. The bundled cables are then hidden behind magnetic flaps. So you can hide unsightly cables from prying eyes.

Lots of space for components and drives
The completely white interior offers plenty of space for high-performance hardware, for example for E-ATX mainboards up to a width of 280 mm and high-performance graphics cards with a length of up to 420 mm. Two 2.5-inch SSDs can be mounted on individual, screwless supports on the back of the mainboard tray.

The right cover panel accommodates up to three additional 2.5-inch drives on the inside. The drive cages of the LANCOOL III offer space for four 3.5" or 2.5" drives, while you can install three more 2.5" drives under the power supply cover. The drive trays are all designed to be removed from the case when not in use, for a clean look and excellent airflow.

The I/O panel of the LANCOOL III can be attached to the front either at the top or at the bottom. This allows you to place your PC on the floor as well as on your desk and always have the best possible access to connect your peripherals. It offers a USB-C port, two USB 3.0 Type-A ports and a 4-pin 3.5mm jack for headsets.

Technical details:
- Dimensions: 238 x 523 x 526 mm (W x H x D)
- Weight: not specified
- Material: aluminum (chassis), tempered glass (sides)
- Color white
- Form factor: E-ATX (up to 280 mm), ATX, Micro-ATX, Mini-ITX
Fan total possible:
- 3x 120 / 3x 140 mm (front)
- 3x 120 / 3x 140 mm (cover)
- 1x 120 / 1x 140 mm (rear)
- 3x 120 / 2x 140 mm (power supply cover)
Of which pre-installed:
- 3x 140mm (front)
- 1x 140mm (rear)
Radiator mounts:
- 1x max. 360 mm (front)
- 1x max. 360 mm (floor)
- 1x max. 420 mm (cover)
drive bays:
- 2x 2.5 inch (MB tray)
- 3x 2.5 inch (right cover)
- 3x 2.5 inch (on the PSU cover)
- 4x 3.5 / 2.5 inch (drive cage)
- Power supply: 1x standard ATX (optional)
- Maximum power supply length: up to 220 mm
- Expansion slots: 8
I/O panel:
- 1x USB-C
- 2x USB 3.0 (Type-A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x 3.5 mm jack (4-pin, TRRS, audio in/out)
- 1x power button
- 1x reset button
- Maximum graphics card length: max. 420 mm
- Maximum CPU cooler height: 185mm max