To connect the individual components of the water cooling system to choose the right connections and the adequate number is essential. Otherwise the installation will quickly into a frustrating experience if the assembly fails at the wrong or a few joints and been delayed due to his.
Bitspower offers a comprehensive range of this, which holds for each claim the right solution - whether adapters, direct hose connections, angle or distributor. Execution is always solid, and has a sealing ring. Ensure that the connections remain tight and long term durability.
This is a flow sensor with blackish shiny nickel terminals with G1/4-Zoll-Innengewinden. The coolant flows through the Flow Indicator and thereby drives a black bucket. The speed of which serves as a flow indicator and is output on the back of a 3-pin cable.
Stick it to the motherboard, can be like a connected fans to read the speed and thus verify that the pressure in the water cycle is desired. To increase the flow coefficient for a better reading, adapters can be placed at the inlet or outlet, which reduce the internal diameter to 8 or even 5 mm.
Material: brass, nickel-plated black
Female: 2x 1/4 inch
3-pin RPM signal cable: 600 mm Length
Flow adapter: 5 mm and 8 mm (ID)