Water Blocks
Radiators
Reservoirs
Pumps & Accessories
Hose & Tubing
Hose Fittings
Water Cooling Kits
Coolant & Additives
Accessories
Case Fans
CPU Coolers
Other Coolers
Fan Controllers
Accessories
Thermal Compound
ATX / ITX Cases
Cases by Brand
Case Accessories
Power Supplies
Processors
Motherboards
Memory
Graphics Cards
Storage
Cables
Everything Else
Cable Connectors
Case Modding
Cable Braid / Sleeving
Lighting
Tools
Mice
Keyboards
Headsets
Speakers
Monitors
Other
WCUK Spec Watercooling KitsLoading Products..
Bitspower Fittings
SPECIAL OFFER Bitspower Fitting 1/4 inch to 11mm ID - Blood Red
Bitspower Fitting 1/4 inch to 11mm ID - Blood Red...
0 ReviewsSKU: CB6-WAAD-313
EAN: 4711946738938
SPECIAL OFFER Bitspower Connection Angle 1/4 inch to 11/8mm - Rotating, Shiny Silver
To connect the individual components of the cooling water, choosing the rightconnections, and providing sufficient number is essential. Otherwise, the installationquickly became a frustrating experience if the Assembly fails at the wrong or a few jointsand delayed ...
0 ReviewsSKU: CB8-WAAD-034
EAN: 4711946740405
Bitspower Connection 1/4 inch to 16/10mm - Blood Red
Bitspower Connection 1/4 inch to 16/10mm - Blood Red...
0 ReviewsSKU: WAAD-287
EAN: 4719552219025
BitsPower Multi-Link adapter G1/4 inch 16 mm OD - matt black
This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 16 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides an absolutely tight connection. The matte black finish also looks very cool and will leave a last...
0 ReviewsSKU: WASC-345
EAN: 4719552221011
BitsPower G1/4 inch to 10mm ID - carbon bla
This Bitspower connection is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 10 mm internal diameter. The connection is through a rubber seal on the G1 / 4-inch side especially protected against leaks and allows on the tube side using optional clamps....
0 ReviewsSKU: WASC-322
EAN: 4711946748043
BitsPower Sealing plug G1/4 Inch - Allen, carbon black
This Bitspower sealing plugs with G1 / 4-inch male thread is ideal for temporary or permanent closure of a G1 / 4-inch female thread. For this purpose, the plug must only be screwed and tightened into the free thread. Thanks rubber seal the opening is then sealed completely tight....
0 ReviewsSKU: WASC-315
EAN: 4711946738051
BitsPower T adapter 3x IG 1/4 inches - blood red
This Bitspower T-Adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of three G1 / 4-inch female threads and allows for flexible mounting. The blood-red finish also looks very cool and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-300
EAN: 4711946739324
BitsPower terminal 90 degrees 2x G1/4 inner thread - white
This Bitspower connection is the connecting piece between two watercooling components, each with a G1 / 4-inch male thread. The connection is particularly protected against leakage thanks to its rubber seals on each side. The white finish also looks very classy and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-302
EAN: 4719552217281
BitsPower Adapter 90 degrees G1/4 to G1/4 IG - 3x rotation, shiny silver
This Bitspower 90 degree adapter has a G1 / 4-inch female thread, a G1 / 4-inch external thread and can be rotated in three places 360 degrees. Not only does the installation a breeze, the course of a water cooling circuit is can also align very precisely. Fitted with a rubber seal on one side and the "Hiding O-ring design" on the other side sits t...
0 ReviewsSKU: WASC-362
EAN: 4711946741068
BitsPower Q adapter 5x IG1/4 inches - matt black
This Bitspower Q adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of five G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also looks very cool and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-367
EAN: 4711946744755
BitsPower Multi-Link adapter for 2x 12mm AD - royal blue
This Bitspower Multi-Link adapter is the connecting piece between two acrylic tubes with 12-meter outer diameter. Equipped with four black rubber seals sitting the adapter securely on the tube and provides an absolutely tight connection. The royal-blue finish also looks very cool and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-370
EAN: 4712914772305
BitsPower Multi-Link Adapter 90 degrees G1/4 12mm AD - rotatable, carbon black
This Bitspower Multi-Link adapter serves as a 90-degree connector between an acrylic tube with 12 m outside diameter and a watercooling component with G1 / 4-inch female thread. Equipped with red and black rubber seals sitting the adapter completely safe and provides a tight connection. The carbon-black finish also looks very cool and will leave a ...
0 ReviewsSKU: WASC-293
EAN: 4719552218820
BitsPower Adapter 90 degrees 2x G1/4 - shiny silver
This Bitspower 90 degree adapter has two G1 / 4-inch female threads and allows for easy alignment of a water cooling circuit. The "Hiding O-ring design" of the terminal also allows a complete sinking of the rubber seal of the G1 / 4-inch counterpart in this adapter, so that it is no longer visible from the outside. The silver finish also looks very...
1 ReviewsSKU: WASC-372
EAN: 4719552215560
BitsPower T adapter 3x IG1/4 inches - matt black
This Bitspower T-Adapter is the connecting piece between multiple branches of a refrigeration cycle. For this purpose, the little helper a total of three G1 / 4-inch female threads and allows for flexible mounting. The matte black finish also looks very cool and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-368
EAN: 4712914770646
BitsPower Multi-Link adapter G1/4 12mm AD - white
This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 12 mm outer diameter. Equipped with three rubber seals sitting the adapter securely on the tube and provides an absolutely tight connection. The white finish also looks very cool and will leave a lasting im...
0 ReviewsSKU: WASC-332
EAN: 4719552218660
BitsPower sealing plugs G1/4 - hexagonal, silver
This Bitspower sealing plugs with G1 / 4-inch male thread is ideal for temporary or permanent closure of a G1 / 4-inch female thread. For this purpose, the plug must only be screwed and tightened into the free thread. Thanks rubber seal the opening is then sealed completely tight....
0 ReviewsSKU: WASC-352
EAN: 4711946742560
BitsPower connection G1/4 inch to 10mm ID - white
This Bitspower connection is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 10 mm internal diameter. The connection is through a rubber seal on the G1 / 4-inch side especially protected against leaks and allows on the tube side using optional clamps. The white finish also looks very cool and wil...
0 ReviewsSKU: WASC-338
EAN: 4719552210749
BitsPower connection G1/4 inch to 10mm ID - blood red
This Bitspower connection is the connecting piece between a watercooling component with G1 / 4-inch female thread and a hose with 10 mm internal diameter. The connection is through a rubber seal on the G1 / 4-inch side especially protected against leaks and allows on the tube side using optional clamps. The blood-red finish also looks very cool and...
0 ReviewsSKU: WASC-328
EAN: 4711946738730
BitsPower Multi-Link adapter G1 / 4 IG 12mm AD, pluggable - blood red
This Bitspower Multi-Link adapter is the connecting piece between a watercooling component with G1 / 4-inch connection and an acrylic tube with 12 mm outer diameter. Equipped with black rubber seals sitting the adapter securely on the tube and provides an absolutely tight connection. The blood-red finish also looks very cool and will leave a lastin...
0 ReviewsSKU: WASC-299
EAN: 4719552209415
BitsPower Y-Adapter 3x IG 1/4 inches - blood red
This Bitspower Y-Adapter is the connecting piece between branches in a refrigeration cycle. For this purpose, the little helper a total of three G1 / 4-inch female threads and allows for flexible mounting. The blood-red finish also looks very cool and will leave a lasting impression on any viewer....
0 ReviewsSKU: WASC-301
EAN: 4711946739898
BitsPower Outlet adapter G 1/4 IG for Eheim 1048 - white
This Bitspower outlet adapter has a G1 / 4-inch exterior and a G1 / 4-inch female thread. It consists of carefully crafted brass and fits perfectly on the outcome of an Eheim pump 1048. Fitted with a rubber gasket sits the adapter securely, and holds the connection absolutely tight. The white finish also looks very cool and will leave a lasting imp...
0 ReviewsSKU: WASC-303
EAN: 4719552210831