water cool Heatkiller V Pro RTX 4090 FE, ARGB - acrylic + nickel, black [15662]

- Effective cooling performance thanks to the nickel-plated electrolytic copper base
- Cools GPU, memory and voltage converters
- Chic black stainless steel cover
- Integrated ARGB lighting
- Quality materials and efficient design

The Watercool Heatkiller V combines the best of the previous models and replaces the manufacturer's factory-fitted cooling solution with a highly potent water cooler. It was specially developed for the RTX 4090 FE from NVIDIA.

The cooler consists of various high-quality materials. The part through which water flows is made of high-purity and nickel-plated electrolytic copper, covered by a cover made of transparent acrylic. The refined cooling structure, the increased flow and the dual-layer inflow are the main reasons for even better cooling results.

Large area for perfect cooling
The bearing surface of the heat sink also covers the RAM chips, which are also cooled as a result. The fine microstructure in the GPU area guarantees optimal cooling. With this cooler, the active cooling of all voltage converters was not avoided.

Of course, insulating spacers are included, which ensure easy and problem-free installation. All channels have a large volume, so that flow resistance and the overall weight remain low.

Note: The cooler is only suitable for NVIDIA GeForce RTX 4090 FE cards! The original cooler must be removed before assembly, which will void the manufacturer's warranty!

Technical details:
- Dimensions: 220 x 124 (including terminal) x 32.8mm (including backplate) (L x W x H)
- Material: nickel-plated electrolytic copper (base), acrylic (lid), acetal (terminal), stainless steel (cover)
- Thread: 4x G1/4 inch
- Pressure (tested): 1 bar
- Lighting: yes, ARGB
- Compatibility:
- NVIDIA RTX 4090 Founders Edition
- Scope of delivery:
- 1 x HEATKILLER V PRO aRGB
- 1 x HEATKILLER V PRO backplate black
- 1 * Dual Slot Bracket
- 1 x mounting material
- 1 x Thermal Grizzly Kryonaut thermal compound

Note: Some coolers are delivered with a protective film on the bottom. This must be removed before installation and commissioning in any case. We assume no liability for damage caused by faulty or incorrect assembly and improper use!