kolink Inspire K2 Plus ARGB Micro-ATX Case, Tempered Glass - Black [INSPIRE K2 PLUS ARGB]

- Tempered glass side panel
- 1x pre-installed 120mm ARGB fan on the back
- Space for 2x 120 or 140 mm fans on the front
- Space for graphics cards up to 300 mm long and CPU coolers up to 160 mm
- I/O panel with one USB 3.0, two USB 2.0 and RGB LED control
- Particularly light and transportable at 4.3 kilograms
- The Inspire K2 Plus midi tower

Inexpensive Micro-ATX case from Kolink for gamers
The Kolink Inspire K2 Plus is a very affordable Micro-ATX case suitable for style-conscious gamers. It can accommodate graphics cards up to 30 cm long. Particularly striking is the front with the pyramid-like curvature and the recesses, reminiscent of conductor tracks on a circuit board, through which air can enter the housing.

The front is accentuated by a partially translucent strip behind which a digitally addressable RGB LED strip is attached. At the top of the front cover is the I/O panel with the USB 2.0 and USB 3.0 ports and the controls for the RGB lighting. A side panel made of tinted tempered glass completes the stylish design of the Inspire K2.

The Inspire K2 Plus midi tower
Plenty of space for hardware and cooling
Inside there is space for a Micro-ATX or Mini-ITX mainboard. Installed graphics cards can be 320 millimeters long, with 160 millimeters there is enough space for CPU coolers for most common models. Two 120 or 140 fans can be accommodated on the front. Two more 120 mm fans can be attached to the lid. A 120mm ARGB fan is pre-installed on the rear.

If you prefer a water-cooled system, you can attach a 240 or 280 mm radiator to the front. A 120 mm radiator can be attached to the rear.

There are two bays for 3.5" hard drives under the PSU cover and an independent compartment for 2.5" hard drives on the motherboard wall of the case. The K2 Plus offers great flexibility to install different drives according to your needs.

Technical details:
- Dimensions: 200 x 390 x 350 mm (W x H x D)
- Material: steel (housing), tempered glass (side panel), plastic (front)
- Weight: approx. 4.3 kg
- Color: Black
- Form Factor: Micro ATX, Mini ITX
- Fan total possible:
- 2x 120 / 140 mm (front)
- 2x 120 mm (lid)
- 1x 120mm (rear)
- Of which pre-installed:
- 1x 120mm (rear)
- Radiator mounts:
- 1x max. 280 mm (front)
- 1x max. 120 mm (rear)
- drive bays:
- 2x 3.5/2.5 inches (internal, HDD cage on the floor)
- 2x 2.5 inch (internal, backside mainboard tray)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 4
- I/O panel:
- 1x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 2x USB 2.0 (Type A, max. 480 Mbit/s)
- 2x 3.5 mm jack (1x audio in/out each)
- 1x Reset/RGB control
- 1x power switch
- Maximum graphics card length: 300mm
- Maximum CPU cooler height: 160mm
- Maximum power supply length: 165 mm