cool master TD300 Mesh, Micro-ATX Case, ARGB, Tempered Glass - white [TD300-WGNN-S00]

- Up to six fans can be installed
- Supports water cooling systems
- For motherboards in Micro-ATX and Mini-ITX form factor
- Graphics cards up to 344 mm
- CPU cooler up to 166mm
- Power supplies up to 325 mm
- Hard drive cage can be removed or moved
- Space for 2x 3.5 inches or up to 4x SSDs

The Cooler Master TD300 mesh case in detail
Get the party to your desk. The Cooler Master TD300 Mesh accompanies your gaming sessions. ArgB fans shed new light on your gaming adventures with the help of the polygonal front,which is specially shaped and cut out. Behind the three-dimensional design hides a sophisticated system with dust filter function for best airflow.

Optimal Airflow: These fans should not be missing
Do you want to build a quiet and powerful system? In the Cooler Master TD300 made of mesh you can install six 120mm or four 140mm fans. Two 120mm ARGB fans are pre-installed. These options are available to you in total:

Three 120/two 140mm fans on the lid
In the front three 120 / two 140 mm fans
In the back of a 120mm fan

You don't have to be afraid that a few won't find a connection. The Cooler Master TD300 Mesh has an ARGB PWM hub (max. five ARGB, four PWM fans) including controller, with which you can even control the addressable LEDs of your fans. This saves you the need to replace the motherboard. You can easily enjoy the color splendor and effects of ARGB. To keep your housing clean with the best airflow, dust filters are attached to the front, bottom and lid.

Give it the right kick with a water cooling system
If you want to tickle the high-end performance out of your system, you will of course need water cooling. With the Cooler Master TD300 Mesh you can install radiators as follows:

In the lid up to 280 mm
In the front up to 280 mm
In the back up to 120mm

This hardware fits in
The two-chamber design gives you a clean look and easy cable management. Motherboards fit into the Micro-ATX and Mini-ITX form factor. You can make a small system big with a graphics card up to 344 mm in length. For your processor you can install a cooler up to 166 mm in height.

In this compact system, you don't fear a hard drive
size. Either two 3.5 or 2.5 inch HDDs or SSDs can be installed in a cage. You have even more space for two more 2.5-inch SSDs on the back of the motherboard tray. The ATX power supply can be up to 325mm long when you remove the hard drive cage.

If you want to leave it inside, you need a power supply that is only 140 mm long.

The I/O panel at a glance
The panel is located in the transition between the lid and the front. It contains two USB 3.0 ports, as well as two 3.5 mm jack plugs for microphone and headphones. In addition to the power switch, you will also find the reset button, which can be used in many ways. You can either use it on the motherboard for its original purpose, or connect it to the ARGB controller to control the RGB lighting.

Specifications:
Dimensions: 210 x 410 x 366.5 mm (W x H x D)
Material: steel (interior), plastic, tempered glass
Weight: 5.85kg
Color white
Form Factor: Micro ATX, Mini ITX
Fan total possible:
Front: 3x 120 / 2x 140 mm
Lid: 3x 120 / 2x 140 mm
Rear: 1x 120mm
Radiator mounts:
Front: 1x max. 280/ 240/ 140/ 120 mm
Lid: 1x max. 280/ 240/ 140/ 120 mm
Rear: 1x 120mm
Filter: front, top, bottom
drive bays:
Side: 2x 2.5 inches
HDD cage: 2x 2.5/3.5 inch
Cable management slot: 18 to 22 mm
Power supply: 1x ATX up to 325 mm (without hard drive cage) or 140 mm (with)
Expansion slots: 4 (vertical)
I/O panel:
2x USB 3.0 types
A
1x audio
input 1x
audio output 1x reset button 1x power switch
Maximum graphics card length: 344 mm
Maximum CPU cooler height: 166mm