Watercool MO-RA3 420 LT black [25100]

The coolant then flows fourfold in parallel by 80 rows of tubes. Despite a very large surface, this allows a low flow resistance. The fins of the MO-RA3 were specially optimized for the use of low rotation fan. The gigantic surface of the radiator and efficient geometry extreme cooling performance are guaranteed. Additional versatility is also the new flow-optimized connection block. This provides three G1 / 4 inch connection thread for flexible positioning of the terminals.

Possible fan configurations:

MO-RA3 420 LT
9 pieces 140 x 140 x 25 mm Fan

MO-RA3 420 Pro
18 pieces 140 x 140 x 25 mm Fan

For fans with a greater height optional mounting kits are available.

When MO-RA3 LT, only one side will be fully equipped with fans. The site is, however, freely selectable. With little effort, the factory-mounted brackets can be mounted on the opposite side.

When MO-RA3 Pro both sides can be equipped with both fans. Thus twice as many fans as the MO-RA3 LT can be installed. The double-sided mounting also allows an effective push-pull operation of the fan.

In addition, other threads in the housing are integrated. These optional accessories can be mounted. These include different fan grills, feet as well as external mounts.

Except for the fan and connections all necessary for the operation of components already included. There are at the screw plugs for sealing unused connection thread, fan screws and spacers for the housing assembly.

The MO-RA3 is produced in Europe. Much of the components will be manufactured in Germany, the development and assembly is also carried out in Germany.

Technical specifications:
Material internal: Copper tubes, aluminum fins
Material Housing: steel sheet coated, stainless steel polished
External dimensions (L x W x H): 475.5 x 430 x 65mm
Weight: 7700G
Pressure tested: 5 bar
Surface: black powder-coated
Connection threads: 6x G 1/4 inch

Delivery:
1x MO-RA3 420 LT
4x screw plug G1 / 4 Inch
4x spacer M4x20mm
1x mounts for 140 mm fan
1x fan coil fan with 25 mm height
1x fitting instructions