Thermaltake View 51 TG ARGB Midi-Tower, Tempered Glass - black [CA-1Q6-00M1WN-00]

The housing offers extensive options for installing a water cooling system and offers three ARGB fans from the factory.

The features of the Thermaltake View 51 TG ARGB Edition at a glance:
- Stylish midi tower with two-chamber design
- Left side part, front and lid made of tempered glass
- Including three ARGB fans
- Suitable for motherboards up to ATX format
- Modular interior design

The Thermaltake View 51 Tempered Glass ARGB Edition in detail:
The Thermaltake View 51 Tempered Glass ARGB Edition offers extensive options for installing a water cooling system: 360 triple radiators can be installed on the lid, on the bottom, on the front and next to the mainboard. Alternatively, 280 heat exchangers are possible at the front, on the main load tray and at the top. Removable templates on the lid and on the front make installation easier.

The development of fans and coolers was also considered. A total of up to 13 case fans can be accommodated in the Thermaltake View 51 Tempered Glass ARGB Edition: there is space for three 120s or 140s on the front and on the lid. Alternatively, two 200 series models are also possible.

A 120 millimeter fan can be installed on the back. On the right next to the mainboard, three 120 or two 140 fans can be installed and there is space for another three 120 mm fans on the floor. A maximum height of 175 millimeters is planned for CPU coolers. Three digitally addressable RGB fans are preinstalled at the factory: two 200-millimeter models on the front and a 120 fan on the rear wall.

Space for drives and components
A total of four data drives can be found in the Thermaltake View 51 Tempered Glass ARGB Edition: In the right chamber there is a drive cage for two 3.5 or 2.5 inch drives. In addition, two carriers for 2.5-inch SSDs are included. These can be mounted on the case bottom; alternatively, there is space for a carrier on the drive cage. The power supply is also housed in the right-hand chamber of the Midi-Tower and can be up to 200 millimeters long.

A total of eight expansion slots for plug-in cards are offered. The entire template with the eight slot covers can be rotated by 90 degrees so that a graphics card can be installed vertically. The riser cable required for this is not included in the scope of delivery, but can be purchased separately in our online shop. There is space for graphics cards up to 440 millimeters. If a pump is installed on the housing base at the intended location, it is 300 millimeters.

Design and connections
The Thermaltake View 51 Tempered Glass ARGB Edition consists of solid radiant panel and is completely black. The left side panel, the front cover and the cover of the housing are made of tempered glass and allow a clear view of the interior of the housing. The right side wall is made of sheet steel and has generous ventilation openings. The manufacturer allows different configurations of the air flow with this housing: whether from front to back, from bottom to top or from the left to the right chamber, that is up to the user.

On the I / O panel of the Midi-Tower there are two USB 2.0 and USB 3.0 ports as well as a USB-C port, a headphone output and a microphone input. The power button is illuminated in white. The three RGB fans can be controlled via a dedicated button on the connector panel of the housing or via compatible mainboards with a 3-pin RGB header (5V). The Thermaltake View 51 Tempered Glass ARGB Edition is compatible with ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light Sync.

Technical details:
- Dimensions: 315 x 550 x 525 mm (W x H x D)
- Weight: TBA
- Material: steel, tempered glass (sides, front, lid)
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 3x 120 / 3x 140 / 2x 200 mm (front)
- 3x 120 / 3x 140 / 2x 200 mm (cover)
- 1x 120 mm (back)
- 3x 120 / 2x 140 mm (right side, MB tray)
- 3x 120 mm (bottom)
Pre-installed:
- 2x 200 mm ARGB (front)
- 1x 120 mm ARGB (rear)
- Radiator mountings (partial waiver of HDD and / or fan slots):
- 1x max. 360/280 mm (front)
- 1x max. 360/280 mm (lid)
- 1x max. 360/280 mm (MB tray)
- 1x max. 360 mm (bottom)
- Filters: right side, bottom
Drive bays:
2x 3.5 / 2.5 inch (internal; HDD cage)
2x 2.5 inches (internal; HDD bracket)
Power supply: 1x standard ATX (optional)
Expansion slots: 8 (rotatable)
I / O panel:
- 2x USB 3.0 type A
- 2x USB 2.0 type A
- 1x USB Type C
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (mic-in)
- 1x RGB button (3-pin / 5V)
- Maximum graphics card length: 300 mm (440 mm without HDD cage)
- Maximum CPU cooler height: 175 mm
- Maximum power supply length: 200 mm