PHANTEKS Revolt 1600W Titanium, ATX 3.0, PCIe 5.0, fully modular - 1600 watts, black [PH-P1600TR_BK01C]

- High efficiency thanks to 80 PLUS Titanium certification
- Quiet 135mm fan for efficient cooling
- Completely modular
- silent operation possible
- Will be delivered without cable!

The Phanteks Revolt ATX 3.0 power supply with 1,600 watts
The Phanteks Revolt 1600W Titanium power supply is a superlative powerhouse. In collaboration with Seasonic, Phanteks is releasing a powerful power supply that has an impressive rated output of 1,600 watts and can be installed in most cases thanks to its ATX format.

The power supply works very efficiently, which results from the use of high-quality electrical components. The power supply, which is certified with 80 PLUS Titanium, achieves an average efficiency of up to 96%. The 135 mm fan can be set to semi-passive mode with a switch so that it is only switched on under higher loads.

PHANTEKS LET YOU CHOOSE YOUR CABLES
The current power supplies of the Revolt series from Phanteks are delivered without a cable. In addition to cable sets from Phanteks themselves, all CableMod cables from the RT series can also be used with the Revolt PSUs. This allows you to buy the cables you need for your build and forego the unnecessary ones. CableMod also offers its cables in a wide range of colors so that you can give your gaming PC a special flair.

Sufficient power for power-hungry gaming setups
Following the ATX 3.0 standard, the Phanteks Revolt can handle power peaks of up to 235% above its nominal power. In addition, the two 16-pin 12VHPWR connectors effortlessly deliver the 600 watts required for modern high-end graphics cards such as the RTX 4090 from NVIDIA.

In addition to a 24-pin connector, the Phanteks Revolt 1600W has two 16-pin 12VHPWR PCIe 5.0 slots for modern high-end graphics cards. There are also a total of nine 8-pin connectors for CPU or PCIe cards and six connectors for SATA or Molex connectors. The fully modular design of the power supply allows you to only use the cables that you really need. The result is a particularly tidy, clean setup with no cable clutter.

Technical details:
- Dimensions: 150 x 86 x 210 mm (W x H x D)
- Fan: 135 mm (automatic control possible with semi-passive mode)
- Colour: black (power supply unit, fan)
- Weight: 2.05 kg
- Efficiency: ~ 94 / 96 / 94% @ 20 / 50 / 100% load, 80 PLUS Titanium certificate
- ActivePFC
- Standard: ATX 3.0
- Power: 1,600 W
- +3.3V: 25A
- +5V: 25A
- +3.3V & +5V: 125W
- +12V: 133.33A / 1,600W
- -12V: 0.5A/6W
- +5VSB: 3A / 15W
- Connections (rear):
- 1x for 24-pin
- 2x 16-pin 12VHPWR PCIe 5.0
- 9x for 4+4 pin and 6+2 pin PCIe
- 6x for SATA / Molex
- Protection circuits:
- OPP (Over Power Protection)
- OVP (Over Voltage Protection)
- UVP (Under Voltage Protection)
- SCP (Short Circuit Protection)
- OCP (Over Current Protection)
- OTP (Over Temperature Protection)
- No Load Protection
- reset protection
- Scope of delivery:
- Accesories:
- 1x user manual
- 1x set of cable ties
- 1x set of screws
- 1x set of Velcro fasteners
- 1x bag for the power adapter
- 1x PSU jumper
- Compatible cables:
- Phanteks Revolt Cable Kit, complete set in black or white
- Phanteks Revolt Cable Kit, starter set in black or white
- CableMod Classic ModMesh RT Cable Kits
- CableMod PRO ModMesh RT Cable Kits
- CableMod PRO ModMesh RT 12VHPWR Dual Cable Kits
- Cablemod PRO ModMesh RT 12VHPWR to 3x 8-pin PCIe
- CableMod PRO ModMesh RT 8-pin PCIe