Lian li LANCOOL 216 RGB, E-ATX case, midi tower - black [LANCOOL216RX]

- A side panel made of tempered glass
- Flexible installation thanks to adjustable mainboard position
- Space for graphics cards up to 392 mm long
- Suitable for 3 radiators (2x 360 and 1x 240 mm)
- Including two large ARGB fans in the front and one PWM fan in the back
- Customizable for AiO or air cooling
- Space for up to six SSDs and hard drives

The Lian Li LANCOOL 216 RGB Midi Tower in detail
With the LANCOOL 216, housing specialist Lian Li offers a modern and functional midi tower with an attractive price-performance ratio. The case is based on a sturdy steel construction with a fully removable front cover. The tempered glass side panel provides a view of the inside of the case so that the installed hardware can be admired.

LANCOOL 216 RGB: Housing for air and complete water cooling
Thanks to the excellent cooling properties of the LANCOOL 216 RGB, high-performance gaming PCs can develop their full performance. The PC case offers options for installing a total of ten fans. Three 120 mm or two 140 mm case fans can be attached to the front and to the lid. 160 mm fans also fit on the front of the case and a 120 or 140 mm fan can be installed on the rear wall.

In air cooling mode, two 120 or 140 mm case fans also fit on the power supply cover. A new feature of the LANCOOL 216 is the PCIe fan bracket, with which a 120 mm fan can be positioned in front of the expansion slots to transport the waste heat from the graphics card out of the case.

Water cooling in the LANCOOL 216 RGB
The interior of the LANCOOL 216 RGB can be optimized for the installation of radiators by rotating the frame for the I/O panel. As a result, the mainboard sits lower and there is more space for the radiator and fan above the mainboard. 360 or 280 radiators can be attached to the front and the housing cover (water cooling mode). A 240 mm radiator can be placed on the power supply cover - only in air cooling mode.

Two 160 mm large RGB fans in the front and a 120 mm fan on the back are pre-installed ex works and ensure a high air flow rate. The front fans are mounted on the outside so that they can be used to cool a radiator. The fastening screws of the radiator and fans do not get in each other's way.

Chic and functional design
The LANCOOL 216 RGB was specifically designed with the cooling of high-performance hardware in mind and offers numerous air inlets: The front cover consists mainly of air-permeable mesh. The back, the lid and the bottom of the case also have generous ventilation openings. The lid is equipped with a magnetic dust filter, the dust filter under the power supply is in a slot. This means that all filters can be removed and cleaned easily. The side panels are attached with knurled screws, which allows the housing to be opened without tools.

LANCOOL 216: Plenty of space for components and drives
The completely black interior of the LANCOOL 216 RGB offers plenty of space for powerful hardware, so that E-ATX mainboards up to 280 mm wide and high-performance gaming graphics cards with a length of up to 392 mm can be installed. The 7 expansion slots are housed in a modular bracket and rotate 90 degrees, allowing the graphics card to be installed vertically (using a riser cable sold separately).

Two separate carriers for 2.5-inch SSDs are provided on the back of the mainboard tray. Under the LANCOOL 216's power supply cover is a drive cage for two 2.5 or 3.5 inch drives. Behind the cage there is space for an ATX power supply with a depth of up to 220 mm. The midi tower's I/O panel offers a USB-C port, two USB 3.0 Type-A ports and a combined 3.5 mm jack for headsets. In addition, the RGB lighting can be controlled via

Technical details:
- Dimensions: 235 x 492 x 481 mm (W x H x D)
- Weight: about 10.5 kg
- Material: steel (chassis), tempered glass (left side panel), plastic
- Color: Black
- Form factor: E-ATX (up to 280 mm), ATX, Micro-ATX, Mini-ITX
- Fan total possible:
- 3x 120 / 2x 140 / 2x 160 mm (front)
- 3x 120 / 2x 140 mm (cover)
- 1x 120 / 1x 140 mm (rear)
- 2x 120 / 2x 140 mm (power supply cover, only in air cooling mode)
- 1x 120mm (PCIe fan mount)
- Of which pre-installed:
- 2x 160mm ARGB (front)
- 1x 140mm PWM (rear)
Radiator mounts:
- 1x max. 360 / 280 mm (front)
- 1x max. 360 / 280 mm (lid)
- 1x max. 240 mm (floor)
- Filter: bottom (removable)
drive bays:
- 2x 2.5 inch (MB tray)
- 2x 2.5 inch (power supply cover)
- 2x 3.5/2.5 inch (HDD cage)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
I/O panel:
- 2x USB 3.0 Type A (USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB 3.1 Type C (USB 3.2 Gen 2, max. 10 Gbit/s)
- 1x 3.5 mm jack (4-pin, TRRS, audio in/out)
- Maximum graphics card length: 392 mm
- Maximum CPU cooler height: 180.5mm
- Maximum PSU Length: 220mm