Lian Li UNI FAN TL Series Reverse Blade Fan - 120mm, white [12RTL1W]

- Practical plug-in system and improved daisy chaining for less cable clutter
- 32 digitally addressable RGB LEDs
- Speed and lighting can be controlled via Lian Li L-Connect 3 software
- Max. 2,300 rpm speed at 34 dB(A)
- 141.7 m³/h max. delivery volume and max. 2.66 mmH2O static pressure
- Rubber pads to decouple annoying vibrations

Note: A Lian Li 12TL fan controller is required for this fan. The fan offered here can be used as an extension for the corresponding 3-pack, which includes the controller. The Lian Li 12TL fan controller is also available individually. A direct connection to the mainboard is not possible.

Lian Li UNI FAN TL Series Reverse Blade: Intake fan to complement your setup
The reverse blade version of the Lian Li UNI FAN TL Series is an intake fan that fits perfectly into your setup with conventional Lian Li UNI FAN TL Series. The PWM fan uses the same connector system that frees gaming PCs from unnecessary cable clutter. Lian Li also impresses in terms of cooling performance and sets new standards with breathtaking RGB lighting.

With the Lian Li UNI FAN TL Series reverse blade fans, you can create airflow in the opposite direction while still showcasing the fancy side of the fans' hub. This ensures that you always see the good side of the fan despite the reversed airflow - for a uniform look in your case.

Plug-in system for seamless fan clusters
The assembly of the Lian Li UNI FAN TL Series follows the clever concept of the other fans from Lian Li: The fans are equipped with contact points and are connected to each other using a practical plug-in system. Several fans can be combined into a cluster and conveniently connected to the controller with just one cable. Thanks to this improved daisy chain system, you save time, nerves and prevent unnecessary cable clutter. The pin contacts pass on power as well as PWM and ARGB signals.

Lian Li UNI FAN TL Series Reverse Blade: Impressive performance values
The intake fans work relatively quietly under full load with a maximum of 34 dB(A). The small distance between the fan blades and the frame and the resulting reduced friction resistance allows higher speeds with the same energy consumption and, as a result, a significantly increased air flow and excellent performance values. Cool temperatures are also favored by the increased height of 28 millimeters.

The start/stop mode for your Lian Li UNI FAN TL Series can also be activated using the L-Connect 3 software. If your components are below a temperature you specify (maximum 50 degrees), the fans will stop. In addition, L-Connect 3 offers the option of creating an optimized fan curve for speed and temperature.

Optimized concept for lighting and look
Lian Li has significantly improved the fans. The side LED strips of connected fans have a significantly reduced distance between the individual fans with a distance of 0.7 millimeters compared to 3 and 5.6 millimeters in the previous generation. This creates seamless transitions between the illuminated areas and effects across fan clusters are enhanced. Lian Li has revised the design of the rubber pads and added additional cutouts. This makes the unusual RGB lighting, which also illuminates the infinity mirror on two sides, stand out better.

Technical details:
- Dimensions: 124 x 120 x28 mm (W x H x D)
- Material: Plastic
- Color white
- Bearing: Hydrodynamic plain bearing
- Speed: 0 - 2,300 rpm
- Volume: max. 34 dB(A)
- Delivery volume: max. 141.7 m³/h
- Static pressure: max. 2.66 mmH2O
- Voltage: 12V
- Starting voltage: 5V
- Power consumption: 4.5W
- Lighting:
- Type: digital addressable RGB
- Quantity: 32 LEDs
- Connection: 7-pin combined PWM and ARGB