Lian Li UNI FAN SL-INF 120 ARGB Reverse Blade PWM fan - 120mm, black [UF-RSLIN120-1B]

Features:
- 120 mm PWM intake fan in black with aluminium frame
- Practical plug-in system for fewer cables
- 40 digitally addressable RGB LEDs and mirror effect
- Speed and lighting controllable via software
- Max. 2,100 RPM speed at 32 dB(A)
- 108.05 m³/h max. delivery volume and max. 2.02 mmH2O static pressure
- Rubber isolator for vibration reduction
- Note: Plug-in system only compatible with LULI-028, LULI-029, LULI-030 or LULI-031

The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The reverse blade intake fans allow you to achieve a uniform look when used with the conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create an airflow in the opposite direction and still present the stylised side with the mirrors. This ensures that you always see the most beautiful side of the fan despite the reverse airflow - for a uniform look in your case.

As a further development of the UNI FAN SL, it has an improved delivery volume than the UNI FAN SL-INF and is ideal for use on radiators, but also cuts a good figure as an enclosure fan. The clever daisy-chain plug-in system allows for a tidy look with little cable clutter.

A real highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the powerful ARGB lighting, which provides spectacular lighting effects, especially in combination with the mirrors.

The installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: the fans have pin contacts and are connected with a practical plug-in system. Several UNI FAN SL-INF 120 mm fans are thus connected to form a cluster and no longer have to be connected individually by cable - this saves a lot of time and prevents cable clutter. The pin contacts pass on both current and PWM and ARGB signal.

Suitable for enclosures, radiators and CPU air coolers
The hydrodynamic plain bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures smooth function and life expectancy. Due to the reduced friction losses, higher speeds are achieved than with conventional fans with the same energy consumption. The effective speed is between 200 and 2,100 RPM.. If desired, the fans can be switched off completely by software.

At up to 32 dB(A) under full load, the UNI FAN SL-INF 120 Reverse Blade are not excessively noisy and offer strong performance figures with 108.05 m³/h delivery volume and 2.02 mmH2O static pressure at full speed.

Powerful ARGB illumination and mirror effect
The Lian Li UNI FAN SL-INF 120 Reverse Blade houses a total of 40 digitally addressable RGB LEDs. They are distributed over the hub of the rotor and two thin strips in the aluminium frame. On the front of the hub and on two sides, mirrors are also installed, which enhance the lighting effects.

To control the speed and the ARGB lighting, you can connect fan clusters directly to the mainboard via an adapter. The free L-Connect 3 software can be used to configure the lighting. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included in the 3-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).
Note: The Lian Li L-Connect 3 software for this product is now available for download. You can find out all the details about the new version here.

Specifications:
    Dimensions: 120 x 122.1 x 25 mm (W x H x D)
    Material: Plastic, Aluminium
    Colour: Black
    Fans:
    Bearing Type: Fluid Dynamic Bearing
    Fan speed: 200 - 2,100 RPM
    Acoustic Noise: max. 32 dB(A)
    Airflow: max.108.05 m³/h
    Air Pressure: max. 2.02 mmH2O
    Operational Voltage: 12 V
    Start Voltage: 6 V
    Input Current: 0.18 A
    Input Power: 5.16 W
    Lighting:
    Type: digitally addressable RGB
    No. of LEDs: 40
    Input Current: 0.6 A
    Connection: 7-Pin combined PWM ARGB

Media info