Lian Li UNI FAN AL120 RGB PWM Fan - 120mm, white [UF-AL120-1W]

The UNI FAN AL120 RGB is a PWM fan with a well-thought-out interlocking design for easy installation and less cable clutter. The UNI FAN AL120 series fans from Lian Li are equipped with addressable RGB LEDs and elements made from aluminium. Thanks to their high performance, they are suitable for use on air coolers and radiators, as well as case fans.

The Features of the Lian Li UNI FAN AL120 at a Glance:
- Single 120mm PWM fan in white
- Clever interlocking system for daisy chaining and fewer cables
- Noble design with aluminum elements
- Fan speed and lighting controlled via L-Connect 3 software
- Max. 1,900 rpm speed at 28.3 dB(A)
- Up to 109.6 m³/h airflow with a maximum of 2.62 mmH2O static pressure
- Rubber decoupler for vibration reduction

The features of the Lian Li UNI FAN AL120 in detail
The Lian Li UNI FAN AL120 series uses a clever design concept: each fan has pin contacts instead of cables. With this interlocking system, several fans can be connected to form a daisy chain. Only one connection module with two cables is needed to wire all fans. Several fans no longer have to be connected individually, saving you a lot of time and preventing cable clutter.

The fluid-dynamic ball bearing ensures high running smoothness and a long life span. Due to the reduced friction, higher speeds are achieved compared to conventional fans with the same energy consumption. The effective speed is a maximum of 1,900 rpm. With up to 28.3 dB(A) under full load, the UNI FAN AL120 fans operate quietly. They offer very good performance for use on CPU coolers, radiators, or as case fans with 109.6 m³/h airflow and 2.62 mmH2O static pressure at full speed.

The fans have digitally addressable RGB LEDs on the rotor blade and inner fan frame. The two zones can be controlled individually or together to create unique effects and light shows.

Note: To control and configure the fan speed and the ARGB lighting, an existing system with a Lian Li UNI HUB controller is required. The fan offered here serves as an extension for a corresponding triple pack that includes this controller (item no.: LULI-024/LULI-025). The controller is not sold separately.

Specifications:
- Dimensions: 120 x 120 x 25mm (W x H x D)
- Materials: Plastic, aluminium
- Colour: white
- fans:
- Included: 1
- Bearing: Fluid dynamic
- Speed: 800 - 1,900 rpm
- Noise: 17 - 28.3 dB(A)
- Air flow: up to 109.6 m³/h
- Static pressure: up to 2.62 mmH2O
- Voltage: 12V
- Starting voltage: 6V
- Current: 0.22A
- Power consumption: 5.94 W
- Lighting:
- Type: digitally addressable RGB
- Connector: 3-pin RGB (5VDG, 5V)
- Current: 0.66A
- Warranty: 2 years