Kolink Inspire K12 ARGB Midi Tower - black [INSPIRE K12]

- Supports motherboards up to ATX and 330 mm long GPUs
- A pre-installed Kolink Umbra S ARGB/PWM 120mm fan
- Space for up to four drives
- Tempered glass side panel with hinges and magnetic closure
- Well-equipped I/O panel with USB-A 3.1 ports
- The Inspire K12 midi tower

The Kolink Inspire K12 Midi Tower: The perfect home for your gaming hardware
With the Kolink Inspire K12 midi tower you don't have to choose between aesthetics and airflow. This case is the first in the Kolink Inspire series to integrate both ARGB lighting and airflow functions in one model. Enjoy the vibrant lighting of the pre-installed Kolink Umbra S ARGB/PWM 120mm fan and the two LED strips that illuminate the front mesh panel. With support for up to ATX motherboards, 330mm graphics cards and water cooling systems, this PC case is perfect for housing powerful gaming hardware.

The Inspire K12 midi tower
Inspiring aesthetics
The Kolink Inspire series is known for its bold aesthetics, bright RGB lighting and all-round stylish looks. The Kolink Inspire K12 Midi-Tower PC case follows this trend, but is the first in the series to focus equally on airflow. The front panel is covered in mesh, which is accentuated by two ARGB LED strips. This lighting is paired with a pre-installed Kolink Umbra S ARGB/PWM 120mm fan mounted on the back. Both lights can be synchronized and controlled via the reset button or compatible motherboard software.

The classic matte black finish of the metal frame creates the perfect backdrop for this lighting. To showcase your high-end hardware, the Kolink Inspire K12 features a half-height tempered glass side panel that hinges for easy access and attaches with magnets instead of screws. This panel is also tinted for a sophisticated finish.

The Inspire K12 midi tower
Inspiring airflow
In addition to the mesh paneling, the Kolink Inspire K12 offers extensive air and water cooling support as well as a fully ventilated power supply cover. The front can support either three 120mm or 140mm fans. Alternatively, radiators with a length of up to 360 mm can also be mounted here.

There is space on the ceiling for two fans of either size or a slim 240mm radiator, or smaller. The pre-installed 120mm fan is located on the back and can be replaced with a radiator of the same size. Additionally, there are two 120mm fan mounts on the PSU shroud to further improve cooling in this secondary chamber. Finally, there is space for CPU coolers with a height of up to 160 mm.

The Inspire K12 midi tower
For inspiring hardware
The Kolink Inspire K1 is more than just a beautiful PC case. This case is intelligently designed to support an amazing range of gaming hardware. The backplate can accommodate motherboards in ATX, Micro-ATX and Mini-ITX format and offers seven PCIe expansion slots on the back. There is space for GPUs up to 330mm long, making the case compatible with a wide range of graphics cards currently available. There is space under the power supply cover for PSUs up to 180 mm long.

Up to four drives can be installed in the Kolink Inspire K12 as storage. There are two brackets that can support either 2.5-inch SSDs or 3.5-inch HDDs, as well as two removable SSD slots on the back of the motherboard tray. This enables a flexible storage solution that is both fast and has sufficient capacity.

The Inspire K12 midi tower
Inspiringly functional
To simplify cable management, the I/O panel of the Kolink Inspire K12 is mounted on the side. This allows for better cable routing to the motherboard. This I/O panel includes two USB 2.0 ports and one USB-A 3.1 port as well as an HD audio jack.

The Kolink Inspire K12 Midi-Tower PC case is equipped with two dust filters that help prevent dirt buildup. The first is located on the top of the case and is magnetic so you can easily remove and clean the filter. The second dust filter is located at the bottom of the housing.

Technical details:
- Dimensions: 200 x 440 x 350 mm (W x H x D)
- Material: steel, tempered glass, ABS, PVC
- Weight: 4.58 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- Front: 3x 120 / 140 mm
- Lid: 2x 120 / 140 mm
- Back: 1x 120 mm
- Power supply cover: 2x 120 mm
- Of which preinstalled:
- Back: 1x 120 mm
- Radiator mountings:
- Lid: 1x max. 280 mm (slim format)
- Front: 1x max. 360 mm
- Filter: base (removable), lid (magnetic)
- Drive bays:
- 2x 3.5 inch / 2.5 inch (tool-free installation)
- 2x 2.5 inches (back of motherboard tray)
- Expansion slots: 7
- I/O panel:
- 1x USB 3.1 (Type A, USB 3.2 Gen 2, max. 10 Gbit/s)
- 2x USB 2.0 (Type A, max. 480 Mbit/s)
- 1x 3.5 mm jack (4-pin, TRRS, for microphone/headphones)
- 1x power button
- 1x Reset Button / LED control
- Maximum graphics card length: 330 mm
- Maximum CPU cooler height: 160mm
- Power supply: max. 180 mm length