DeepCool PX1000G power supply, 80 Plus Gold, ATX 3.0, PCIe 5.0 - 1000 watts [R-PXA00G-FC0B-EU]

Fits in a variety of cases
1,000 watts of rated power for components from the high-end segment
With 80 PLUS Gold certification
Fully modular cable management with black cables
12VHPWR connector for modern high-performance graphics cards
Be ready for the future!

With the ability to deliver three times the total GPU performance and twice the system performance for 0.1ms, performance spikes will never be a problem again. The PX1000G will provide stable and consistent power for both legacy computers and next-generation PCs for the foreseeable future.

Powerful ATX 3.0 power supply with 80 Plus Gold
80 PLUS GOLD and CYBENETICS GOLD certified for high efficiency under typical load conditions.

Best quality
Solid and reliable performance is ensured by using Japanese 105C capacitors. Due to the high quality of the power supply, the PX1000G can operate at altitudes of up to 5,000 meters above sea level.

Reliable and stable
By using a topology with two main capacitors, the PX1000G can maintain the backup time at full load = 16 ms.

PCI-E 5.0: Performance perfected
Equipped with the new PCI-e Gen 5.0 12VHPWR cable, the PX-G delivers up to 600W for power-hungry graphics cards.

From static to dynamic
The PX1000G is equipped with the option to switch to semi-fanless operation. In hybrid mode, the 135mm FDB fan dynamically adjusts from its zero-speed state once the system load reaches a certain threshold.

Always worry-free
The PX1000G has a number of comprehensive protection mechanisms including OPP, OVP, SCP, OTP, OCP and UVP.

Technical details:
- Performance
- Total power 1000 W
- AC input voltage 100 - 240 V
- AC input frequency 50 - 60 Hz
- Maximum input current (at 110V) 6.5 A
- Maximum input current (at 220V) 13 A
- Power Factor Correction Filter (PFC) Active
- Combined power (+3.3V) 120 W
- Combined power (+12V) 999.6 W
- Combined power (+5V) 120 W
- Combined power (-12V) 3.6W
- Combined current (+5Vsb) 15W
- Max. output current (+3.3V) 22 A
- Max. output current (+12V) 83.3 A
- Max output current (+5V) 22 A
- Max. output current (-12V) 0.3 A
- Max. output current (+5Vsb) 3 A
- Hold time 16 ms
- Efficiency 90%
- Energy protection features overload, overheating, overvoltage, undervoltage, overcurrent, short circuit