- Tempered glass side panel
- Elegant front with rounded edges
- Includes 3x pre-installed 120mm RGB fans
- Graphics cards up to 296 mm, CPU coolers up to 159 mm
- I/O panel 1x USB 3.0 Type A, 2x USB 2.0 & each 1x Audio In and Out
- Airy mini tower for your gaming setup
The black Mini-Tower Aerocool Hexform-G-BK-v1 for budget systems features an elegant design, a front with rounded edges and generous air intakes, a pre-installed 120 mm fan and generous air cooling options. With space for Mini-ITX and Micro-ATX motherboards as well as graphics cards up to 296 mm, even full-blown gaming PCs can be realized.
The Aerocool Hexform-G-BK-v1 comes with three pre-installed 120mm fans, which are installed on the back and front. The black plastic front features an elegant design with rounded edges and is equipped with large air intakes for good airflow. On the lid is the I/O panel with a USB 3.0 port and two USB 2.0 ports. A large side panel made of tempered glass provides a view into the interior of the steel chassis and the hardware installed there.
Cooling with air and water
In the Aerocool Hexform-G-BK-v1, a total of up to four case fans can be installed: In the front there is space for two 120 mm or 140 mm fans, two 120 fans can be installed in the lid and a 120 mm fan has space at the back of the case. Tower coolers must not exceed a height of 159 mm. There is also the possibility to install water cooling in the Midi Tower. The front can accommodate a 240 radiator and the fan in the back panel can give way to a 120 radiator.
A total of two data storage devices can be installed in the Aerocool Hexform-G-BK-v1. The drive cage at the bottom of the chassis accommodates two 3.5" or 2.5" drives each. For the installation of powerful graphics cards, 296 mm in length are envisaged, unless a radiator is installed in the front. There is 18.9mm of space for cable management.
Specifications:
- Dimensions: 207.5 x 377 x 358 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Color: Black
- Form factor: Micro ATX, Mini ITX
- Total fans possible:
- Front: 2x 120 / 140mm
- Back: 1x 120mm
- Lid: 2x 120mm
Of which pre-installed:
- 1x 120mm fan (rear)
- Radiator support:
- Front: 1x 120 / 240mm
- Back: 1x 120mm
- Drive bays:
- 2x 3.5 / 2.5 inch (internal)
- Power supply: 1x standard ATX
- Expansion slots: 4
I/O panel:
- 1x USB 3.0 (Type A, USB 3.2 Gen 1, max 5 Gbit/s)
- 2x USB 2.0 (Type A, max 480 Mbit/s)
- 1x via audio in/out
- Maximum graphics card length: 296 mm (without front fan)
- Maximum CPU cooler height: 159mm
- Maximum length of power supply (incl. cable): 161 mm